• head_banner_01

MOXA ICF-1150I-M-ST Serial-to-Fiber Converter

Short Description:

The ICF-1150 serial-to-fiber converters transfer RS-232/RS-422/RS-485 signals to optical fiber ports to enhance transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fiber ports. These products not only support single-mode and multi-mode fiber for different transmission distances, models with isolation protection are also available to enhance noise immunity. The ICF-1150 products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.


Product Detail

Product Tags

Features and Benefits

3-way communication: RS-232, RS-422/485, and fiber
Rotary switch to change the pull high/low resistor value
Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode
-40 to 85°C wide-temperature range models available
C1D2, ATEX, and IECEx certified for harsh industrial environments

Specifications

Serial Interface

No. of Ports 2
Serial Standards RS-232RS-422RS-485
Baudrate 50 bps to 921.6 kbps (supports non-standard baudrates)
Flow Control ADDC (automatic data direction control) for RS-485
Connector DB9 female for RS-232 interface5-pin terminal block for RS-422/485 interfaceFiber ports for RS-232/422/485 interface
Isolation 2 kV (I models)

Serial Signals

RS-232 TxD, RxD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND

Power Parameters

Input Current ICF-1150 Series: 264 mA@12to 48 VDC ICF-1150I Series: 300 mA@12to 48 VDC
Input Voltage 12to48 VDC
No. of Power Inputs 1
Overload Current Protection Supported
Power Connector Terminal block
Power Consumption ICF-1150 Series: 264 mA@12to 48 VDC ICF-1150I Series: 300 mA@12to 48 VDC

Physical Characteristics

Housing Metal
IP Rating IP30
Dimensions 30.3 x70 x115 mm (1.19x 2.76 x 4.53 in)
Weight 330 g (0.73 lb)
Installation DIN-rail mounting

Environmental Limits

Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature (package included) -40 to 85°C (-40 to185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

MOXA ICF-1150I-M-ST Available Models

Model Name Isolation Operating Temp. Fiber Module Type IECEx Supported
ICF-1150-M-ST - 0 to 60°C Multi-mode ST -
ICF-1150-M-SC - 0 to 60°C Multi-mode SC -
ICF-1150-S-ST - 0 to 60°C Single-mode ST -
ICF-1150-S-SC - 0 to 60°C Single-mode SC -
ICF-1150-M-ST-T - -40 to 85°C Multi-mode ST -
ICF-1150-M-SC-T - -40 to 85°C Multi-mode SC -
ICF-1150-S-ST-T - -40 to 85°C Single-mode ST -
ICF-1150-S-SC-T - -40 to 85°C Single-mode SC -
ICF-1150I-M-ST 2kV 0 to 60°C Multi-mode ST -
ICF-1150I-M-SC 2kV 0 to 60°C Multi-mode SC -
ICF-1150I-S-ST 2kV 0 to 60°C Single-mode ST -
ICF-1150I-S-SC 2kV 0 to 60°C Single-mode SC -
ICF-1150I-M-ST-T 2kV -40 to 85°C Multi-mode ST -
ICF-1150I-M-SC-T 2kV -40 to 85°C Multi-mode SC -
ICF-1150I-S-ST-T 2kV -40 to 85°C Single-mode ST -
ICF-1150I-S-SC-T 2kV -40 to 85°C Single-mode SC -
ICF-1150-M-ST-IEX - 0to 60°C Multi-mode ST /
ICF-1150-M-SC-IEX - 0to 60°C Multi-mode SC /
ICF-1150-S-ST-IEX - 0to 60°C Single-mode ST /
ICF-1150-S-SC-IEX - 0to 60°C Single-mode SC /
ICF-1150-M-ST-T-IEX - -40 to 85°C Multi-mode ST /
ICF-1150-M-SC-T-IEX - -40 to 85°C Multi-mode SC /
ICF-1150-S-ST-T-IEX - -40 to 85°C Single-mode ST /
ICF-1150-S-SC-T-IEX - -40 to 85°C Single-mode SC /
ICF-1150I-M-ST-IEX 2kV 0to 60°C Multi-mode ST /
ICF-1150I-M-SC-IEX 2kV 0to 60°C Multi-mode SC /
ICF-1150I-S-ST-IEX 2kV 0to 60°C Single-mode ST /
ICF-1150I-S-SC-IEX 2kV 0to 60°C Single-mode SC /
ICF-1150I-M-ST-T-IEX 2kV -40 to 85°C Multi-mode ST /
ICF-1150I-M-SC-T-IEX 2kV -40 to 85°C Multi-mode SC /
ICF-1150I-S-ST-T-IEX 2kV -40 to 85°C Single-mode ST /
ICF-1150I-S-SC-T-IEX 2kV -40 to 85°C Single-mode SC /

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • MOXA ioMirror E3210 Universal Controller I/O

      MOXA ioMirror E3210 Universal Controller I/O

      Introduction   The ioMirror E3200 Series, which is designed as a cable-replacement solution to connect remote digital input signals to output signals over an IP network, provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3200 Series device, or can be sent to a local PLC or DCS controller. Ove...

    • MOXA EDS-518A Gigabit Managed Industrial Ethernet Switch

      MOXA EDS-518A Gigabit Managed Industrial Ethern...

      Features and Benefits 2 Gigabit plus 16 Fast Ethernet ports for copper and fiberTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 ...

    • MOXA UPort 1150 RS-232/422/485 USB-to-Serial Converter

      MOXA UPort 1150 RS-232/422/485 USB-to-Serial Co...

      Features and Benefits 921.6 kbps maximum baudrate for fast data transmission Drivers provided for Windows, macOS, Linux, and WinCE Mini-DB9-female-to-terminal-block adapter for easy wiring LEDs for indicating USB and TxD/RxD activity 2 kV isolation protection (for “V' models) Specifications     USB Interface Speed 12 Mbps USB Connector UP...

    • MOXA NPort 5650-8-DT Industrial Rackmount Serial Device Server

      MOXA NPort 5650-8-DT Industrial Rackmount Seria...

      Features and Benefits Standard 19-inch rackmount size Easy IP address configuration with LCD panel (excluding wide-temperature models) Configure by Telnet, web browser, or Windows utility Socket modes: TCP server, TCP client, UDP SNMP MIB-II for network management Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC) ...

    • MOXA NPort 5210 Industrial General Serial Device

      MOXA NPort 5210 Industrial General Serial Device

      Features and Benefits Compact design for easy installation  Socket modes: TCP server, TCP client, UDP  Easy-to-use Windows utility for configuring multiple device servers  ADDC (Automatic Data Direction Control) for 2-wire and 4-wire RS-485  SNMP MIB-II for network management Specifications   Ethernet Interface 10/100BaseT(X) Ports (RJ45 connect...

    • MOXA TCF-142-M-ST Industrial Serial-to-Fiber Converter

      MOXA TCF-142-M-ST Industrial Serial-to-Fiber Co...

      Features and Benefits Ring and point-to-point transmission Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M) Decreases signal interference Protects against electrical interference and chemical corrosion Supports baudrates up to 921.6 kbps Wide-temperature models available for -40 to 75°C environments ...