English
  • head_banner_01

MOXA EDS-G205A-4PoE-1GSFP-T 5-port POE Industrial Ethernet Switch

  • MOXA EDS-G205A-4PoE-1GSFP-T 5-port POE Industrial Ethernet Switch
  • MOXA EDS-G205A-4PoE-1GSFP-T 5-port POE Industrial Ethernet Switch
  • MOXA EDS-G205A-4PoE-1GSFP-T 5-port POE Industrial Ethernet Switch

Short Description:

The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full Gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 36 watts of power per port and reducing the effort needed for installing power.

The switches can be used to power IEEE 802.3af/at standard devices (power devices), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.


Product Detail

Product Tags

Features and Benefits

  •  Full Gigabit Ethernet ports

    IEEE 802.3af/at, PoE+ standards

    Up to 36 W output per PoE port

    12/24/48 VDC redundant power inputs

    Supports 9.6 KB jumbo frames

    Intelligent power consumption detection and classification

    Smart PoE overcurrent and short-circuit protection

    -40 to 75°C operating temperature range (-T models)

Specifications

 

Input/Output Interface

Alarm Contact Channels 1 relay output with current carrying capacity of 1 A @ 24 VDC

 

Ethernet Interface

10/100/1000BaseT(X) Ports (RJ45 connector) 4Auto negotiation speed Full/Half duplex modeAuto MDI/MDI-X connection
Combo Ports (10/100/1000BaseT(X) or 100/1000BaseSFP+) 1
Standards IEEE 802.3 for10BaseTIEEE 802.3ab for 1000BaseT(X)IEEE 802.3u for 100BaseT(X) and 100BaseFX

IEEE 802.3x for flow control

IEEE 802.3z for 1000BaseX

IEEE 802.3az for Energy-Efficient Ethernet

 

Power Parameters

Connection 1 removable 6-contact terminal block(s)
Input Voltage 12/24/48 VDC, Redundantdual inputs
Operating Voltage 9.6 to 60 VDC
Reverse Polarity Protection Supported
Input Current 0.14A@24 VDC

 

Physical Characteristics

Housing Metal
IP Rating IP30
Dimensions 29x135x105 mm (1.14x5.31 x4.13 in)
Weight 290 g (0.64 lb)
Installation DIN-rail mounting, Wall mounting (with optional kit)

 

Environmental Limits

Operating Temperature EDS-G205-1GTXSFP: -10 to 60°C (14to140°F)EDS-G205-1GTXSFP-T: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

 

 

MOXA EDS-G205A-4PoE-1GSFP-T  Available Models

Model 1 MOXA EDS-G205-1GTXSFP
Model 2 MOXA EDS-G205-1GTXSFP-T
  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • MOXA EDS-205A-M-SC Unmanaged Industrial Ethernet Switch

      MOXA EDS-205A-M-SC Unmanaged Industrial Etherne...

      Features and Benefits 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/single-mode, SC or ST connector) Redundant dual 12/24/48 VDC power inputs IP30 aluminum housing Rugged hardware design well suited for hazardous locations (Class 1 Div. 2/ATEX Zone 2), transportation (NEMA TS2/EN 50121-4), and maritime environments (DNV/GL/LR/ABS/NK) -40 to 75°C operating temperature range (-T models) ...

      See more products >
    • MOXA AWK-3252A Series Wireless AP/bridge/client

      MOXA AWK-3252A Series Wireless AP/bridge/client

      Introduction The AWK-3252A Series 3-in-1 industrial wireless AP/bridge/client is designed to meet the growing need for faster data transmission speeds through IEEE 802.11ac technology for aggregated data rates of up to 1.267 Gbps. The AWK-3252A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the po...

      See more products >
    • MOXA ICF-1150I-S-ST Serial-to-Fiber Converter

      MOXA ICF-1150I-S-ST Serial-to-Fiber Converter

      Features and Benefits 3-way communication: RS-232, RS-422/485, and fiber Rotary switch to change the pull high/low resistor value Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode -40 to 85°C wide-temperature range models available C1D2, ATEX, and IECEx certified for harsh industrial environments Specifications ...

      See more products >
    • MOXA EDS-510A-3SFP Layer 2 Managed Industrial Ethernet Switch

      MOXA EDS-510A-3SFP Layer 2 Managed Industrial E...

      Features and Benefits 2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet port for uplink solutionTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches),  RSTP/STP, and MSTP for network redundancy TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 ...

      See more products >
    • MOXA IMC-21GA Ethernet-to-Fiber Media Converter

      MOXA IMC-21GA Ethernet-to-Fiber Media Converter

      Features and Benefits Supports 1000Base-SX/LX with SC connector or SFP slot Link Fault Pass-Through (LFPT) 10K jumbo frame Redundant power inputs -40 to 75°C operating temperature range (-T models) Supports Energy-Efficient Ethernet (IEEE 802.3az) Specifications Ethernet Interface 10/100/1000BaseT(X) Ports (RJ45 connector...

      See more products >
    • MOXA IMC-21GA-LX-SC Ethernet-to-Fiber Media Converter

      MOXA IMC-21GA-LX-SC Ethernet-to-Fiber Media Con...

      Features and Benefits Supports 1000Base-SX/LX with SC connector or SFP slot Link Fault Pass-Through (LFPT) 10K jumbo frame Redundant power inputs -40 to 75°C operating temperature range (-T models) Supports Energy-Efficient Ethernet (IEEE 802.3az) Specifications Ethernet Interface 10/100/1000BaseT(X) Ports (RJ45 connector...

      See more products >
    Hit enter to search or ESC to close