MOXA EDS-518E-4GTXSFP Gigabit Managed Industrial Ethernet Switch
4 Gigabit plus 14 fast Ethernet ports for copper and fiberTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security
Security features based on IEC 62443
EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and monitoring
Fiber Check™—comprehensive fiber status monitoring and warning on MST/MSC/SSC/SFP fiber ports
Supports MXstudio for easy, visualized industrial network management
V-ON™ ensures millisecond-level multicast data and video network recovery
Input/Output Interface
| Alarm Contact Channels | 1, Relay output with current carrying capacity of 1 A @ 24 VDC |
| Buttons | Reset button |
| Digital Input Channels | 1 |
| Digital Inputs | +13 to +30 V for state 1 -30 to +3 V for state 0 Max. input current: 8 mA |
Ethernet Interface
| 10/100BaseT(X) Ports (RJ45 connector) | EDS-518E-4GTXSFP:14EDS-518E-MM-SC-4GTXSFP/MM-ST-4GTXSFP/SS-SC-4GTXSFP: 12
All models support: Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-Xconnection |
| Combo Ports (10/100/1000BaseT(X) or100/1000BaseSFP+) | 4 |
| 10/100/1000BaseT(X) Ports (RJ45 connector) | Auto negotiation speed Full/Half duplex modeAuto MDI/MDI-X connection |
| 100BaseFX Ports (multi-mode SC connector) | EDS-518E-MM-SC-4GTXSFP Series: 2 |
| 100BaseFX Ports (multi-mode ST connector) | EDS-518E-MM-ST-4GTXSFP Series: 2 |
| 100BaseFX Ports (single-mode SC connector) | EDS-518E-SS-SC-4GTXSFP Series: 2 |
Power Parameters
| Connection | 2 removable 4-contact terminal block(s) |
| Input Current | EDS-518E-4GTXSFP Series: 0.37 A@24 VDCEDS-518E-MM-SC-4GTXSFP/MM-ST-4GTXSFP/SS-SC-4GTXSFP: 0.41 A@24 VDC |
| Input Voltage | 12/24/48/-48 VDC, Redundantdual inputs |
| Operating Voltage | 9.6 to 60 VDC |
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
Physical Characteristics
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 94x135x137 mm (3.7 x 5.31 x 5.39 in) |
| Weight | 1518g(3.35 lb) |
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
Environmental Limits
| Operating Temperature | Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
MOXA EDS-518E-4GTXSFP Available Models
| Model 1 | MOXA EDS-518E-4GTXSFP |
| Model 2 | MOXA EDS-518E-MM-SC-4GTXSFP |
| Model 3 | MOXA EDS-518E-MM-ST-4GTXSFP |
| Model 4 | MOXA EDS-518E-SS-SC-4GTXSFP |
| Model 5 | MOXA EDS-518E-4GTXSFP-T |
| Model 6 | MOXA EDS-518E-MM-SC-4GTXSFP-T |
| Model 7 | MOXA EDS-518E-MM-ST-4GTXSFP-T |
| Model 8 | MOXA EDS-518E-SS-SC-4GTXSFP-T |
Related products
-
MOXA IEX-402-SHDSL Industrial Managed Ethernet ...
Introduction The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on the G.SHDSL or VDSL2 standard. The device supports data rates of up to 15.3 Mbps and a long transmission distance of up to 8 km for G.SHDSL connection; for VDSL2 connections, the data rate supp...
-
MOXA MGate MB3170-T Modbus TCP Gateway
Features and Benefits Supports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Connects up to 32 Modbus TCP servers Connects up to 31 or 62 Modbus RTU/ASCII slaves Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for each Master) Supports Modbus serial master to Modbus serial slave communications Built-in Ethernet cascading for easy wir...
-
MOXA Mini DB9F-to-TB Cable Connector
Features and Benefits RJ45-to-DB9 adapter Easy-to-wire screw-type terminals Specifications Physical Characteristics Description TB-M9: DB9 (male) DIN-rail wiring terminal ADP-RJ458P-DB9M: RJ45 to DB9 (male) adapter Mini DB9F-to-TB: DB9 (female) to terminal block adapter TB-F9: DB9 (female) DIN-rail wiring terminal A-ADP-RJ458P-DB9F-ABC01: RJ...
-
MOXA NPort IA-5250A Device Server
Introduction NPort IA device servers provide easy and reliable serial-to-Ethernet connectivity for industrial automation applications. The device servers can connect any serial device to an Ethernet network, and to ensure compatibility with network software, they support a variety of port operation modes, including TCP Server, TCP Client, and UDP. The rock-solid reliability of the NPortIA device servers makes them an ideal choice for establi...
-
MOXA ioLogik E1260 Universal Controllers Ethern...
Features and Benefits User-definable Modbus TCP Slave addressing Supports RESTful API for IIoT applications Supports EtherNet/IP Adapter 2-port Ethernet switch for daisy-chain topologies Saves time and wiring costs with peer-to-peer communications Active communication with MX-AOPC UA Server Supports SNMP v1/v2c Easy mass deployment and configuration with ioSearch utility Friendly configuration via web browser Simp...
-
MOXA EDS-309-3M-SC Unmanaged Ethernet switch
Introduction The EDS-309 Ethernet switches provide an economical solution for your industrial Ethernet connections. These 9-port switches come with a built-in relay warning function that alerts network engineers when power failures or port breaks occur. In addition, the switches are designed for harsh industrial environments, such as the hazardous locations defined by the Class 1 Div. 2 and ATEX Zone 2 standards. The switches ...