MOXA EDS-408A-SS-SC-T Layer 2 Managed Industrial Ethernet Switch
- Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy
IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported
Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01
PROFINET or EtherNet/IP enabled by default (PN or EIP models)
Supports MXstudio for easy, visualized industrial network management
Ethernet Interface
| 10/100BaseT(X) Ports (RJ45 connector) | EDS-408A/408A-T, EDS-408A-EIP/PN models: 8EDS-408A-MM-SC/MM-ST/SS-SC models: 6EDS-408A-3M-SC/3M-ST/3S-SC/3S-SC-48/1M2S-SC/2M1S-SC models: 5All models support:Auto negotiation speed
Full/Half duplex mode Auto MDI/MDI-X connection |
| 100BaseFX Ports (multi-mode SC connector) | EDS-408A-MM-SC/2M1S-SC models: 2EDS-408A-3M-SC models: 3EDS-408A-1M2S-SC models: 1 |
| 100BaseFX Ports (multi-mode ST connector) | EDS-408A-MM-ST models: 2EDS-408A-3M-ST models: 3 |
| 100BaseFX Ports (single-mode SC connector) | EDS-408A-SS-SC/1M2S-SC models: 2EDS-408A-2M1S-SC models: 1EDS-408A-3S-SC/3S-SC-48 models: 3 |
| Standards | IEEE802.3for10BaseTIEEE 802.3u for 100BaseT(X) and 100BaseFXIEEE 802.3x for flow controlIEEE 802.1D-2004 for Spanning Tree ProtocolIEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
|
Switch Properties
| IGMP Groups | 256 |
| MAC Table Size | 8K |
| Max. No. ofVLANs | 64 |
| Packet Buffer Size | 1 Mbits |
| Priority Queues | 4 |
| VLAN ID Range | VID1 to4094 |
Power Parameters
| Input Voltage | All models: Redundant dual inputsEDS-408A/408A-T, EDS-408A-MM-SC/MM-ST/SS-SC/3M-SC/3M-ST/3S-SC/1M2S-SC/ 2M1S-SC/EIP/PN models: 12/24/48 VDCEDS-408A-3S-SC-48/408A-3S-SC-48-T models: ±24/±48VDC |
| Operating Voltage | EDS-408A/408A-T, EDS-408A-MM-SC/MM-ST/SS-SC/3M-SC/3M-ST/3S-SC/1M2S-SC/ 2M1S-SC/EIP/PN models: 9.6 to 60 VDCEDS-408A-3S-SC-48 models:±19to ±60 VDC2 |
| Input Current | EDS-408A, EDS-408A-EIP/PN/MM-SC/MM-ST/SS-SC models: 0.61 @12 VDC0.3 @ 24 VDC0.16@48 VDCEDS-408A-3M-SC/3M-ST/3S-SC/1M2S-SC/2M1S-SC models:0.73@12VDC
0.35 @ 24 VDC 0.18@48 VDC EDS-408A-3S-SC-48 models: 0.33 A@24 VDC 0.17A@48 VDC |
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
Physical Characteristics
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 53.6 x135x105 mm (2.11 x 5.31 x 4.13 in) |
| Weight | EDS-408A, EDS-408A-MM-SC/MM-ST/SS-SC/EIP/PN models: 650 g (1.44 lb)EDS-408A-3M-SC/3M-ST/3S-SC/3S-SC-48/1M2S-SC/2M1S-SC models: 890 g (1.97 lb) |
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
Environmental Limits
| Operating Temperature | Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
MOXA EDS-408A-SS-SC-T Available Models
| Model 1 | MOXA EDS-408A |
| Model 2 | MOXA EDS-408A-EIP |
| Model 3 | MOXA EDS-408A-MM-SC |
| Model 4 | MOXA EDS-408A-MM-ST |
| Model 5 | MOXA EDS-408A-PN |
| Model 6 | MOXA EDS-408A-SS-SC |
| Model 7 | MOXA EDS-408A-EIP-T |
| Model 8 | MOXA EDS-408A-MM-SC-T |
| Model 9 | MOXA EDS-408A-MM-ST-T |
| Model 10 | MOXA EDS-408A-PN-T |
| Model 11 | MOXA EDS-408A-SS-SC-T |
| Model 12 | MOXA EDS-408A-T |
Related products
-
MOXA TCF-142-M-ST Industrial Serial-to-Fiber Co...
Features and Benefits Ring and point-to-point transmission Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M) Decreases signal interference Protects against electrical interference and chemical corrosion Supports baudrates up to 921.6 kbps Wide-temperature models available for -40 to 75°C environments ...
-
MOXA ioLogik R1240 Universal Controller I/O
Introduction The ioLogik R1200 Series RS-485 serial remote I/O devices are perfect for establishing a cost-effective, dependable, and easy-to-maintain remote process control I/O system. Remote serial I/O products offer process engineers the benefit of simple wiring, as they only require two wires to communicate with the controller and other RS-485 devices while adopting the EIA/TIA RS-485 communication protocol to transmit and receive d...
-
MOXA NPort 5610-16 Industrial Rackmount Serial ...
Features and Benefits Standard 19-inch rackmount size Easy IP address configuration with LCD panel (excluding wide-temperature models) Configure by Telnet, web browser, or Windows utility Socket modes: TCP server, TCP client, UDP SNMP MIB-II for network management Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC) ...
-
MOXA DA-820C Series Rackmount Computer
Introduction The DA-820C Series is a high-performance 3U rackmount industrial computer built around a 7th Gen Intel® Core™ i3/i5/i7 or Intel® Xeon® processor and comes with 3 display ports (HDMI x 2, VGA x 1), 6 USB ports, 4 gigabit LAN ports, two 3-in-1 RS-232/422/485 serial ports, 6 DI ports, and 2 DO ports. The DA-820C is also equipped with 4 hot swappable 2.5” HDD/SSD slots that support Intel® RST RAID 0/1/5/10 functionality and PTP...
-
MOXA CBL-RJ45F9-150 Cable
Introduction Moxa’s serial cables extend the transmission distance for your multiport serial cards. It also expands the serial com ports for a serial connection. Features and Benefits Extend the transmission distance of serial signals Specifications Connector Board-side Connector CBL-F9M9-20: DB9 (fe...
-
MOXA MGate MB3170I-T Modbus TCP Gateway
Features and Benefits Supports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Connects up to 32 Modbus TCP servers Connects up to 31 or 62 Modbus RTU/ASCII slaves Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for each Master) Supports Modbus serial master to Modbus serial slave communications Built-in Ethernet cascading for easy wir...