MOXA EDS-408A-PN Managed Industrial Ethernet Switch
- Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy
IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported
Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01
PROFINET or EtherNet/IP enabled by default (PN or EIP models)
Supports MXstudio for easy, visualized industrial network management
Ethernet Interface
| 10/100BaseT(X) Ports (RJ45 connector) | EDS-408A/408A-T, EDS-408A-EIP/PN models: 8EDS-408A-MM-SC/MM-ST/SS-SC models: 6EDS-408A-3M-SC/3M-ST/3S-SC/3S-SC-48/1M2S-SC/2M1S-SC models: 5All models support:Auto negotiation speedFull/Half duplex modeAuto MDI/MDI-X connection |
| 100BaseFX Ports (multi-mode SC connector) | EDS-408A-MM-SC/2M1S-SC models: 2EDS-408A-3M-SC models: 3EDS-408A-1M2S-SC models: 1 |
| 100BaseFX Ports (multi-mode ST connector) | EDS-408A-MM-ST models: 2EDS-408A-3M-ST models: 3 |
| 100BaseFX Ports (single-mode SC connector) | EDS-408A-SS-SC/1M2S-SC models: 2EDS-408A-2M1S-SC models: 1EDS-408A-3S-SC/3S-SC-48 models: 3 |
| Standards | IEEE802.3for10BaseTIEEE 802.3u for 100BaseT(X) and 100BaseFXIEEE 802.3x for flow controlIEEE 802.1D-2004 for Spanning Tree ProtocolIEEE 802.1p for Class of ServiceIEEE 802.1Q for VLAN Tagging |
Switch Properties
| IGMP Groups | 256 |
| MAC Table Size | 8K |
| Max. No. ofVLANs | 64 |
| Packet Buffer Size | 1 Mbits |
| Priority Queues | 4 |
| VLAN ID Range | VID1 to4094 |
Power Parameters
| Input Voltage | All models: Redundant dual inputsEDS-408A/408A-T, EDS-408A-MM-SC/MM-ST/SS-SC/3M-SC/3M-ST/3S-SC/1M2S-SC/ 2M1S-SC/EIP/PN models: 12/24/48 VDCEDS-408A-3S-SC-48/408A-3S-SC-48-T models: ±24/±48VDC |
| Operating Voltage | EDS-408A/408A-T, EDS-408A-MM-SC/MM-ST/SS-SC/3M-SC/3M-ST/3S-SC/1M2S-SC/ 2M1S-SC/EIP/PN models: 9.6 to 60 VDCEDS-408A-3S-SC-48 models:±19to ±60 VDC2 |
| Input Current | EDS-408A, EDS-408A-EIP/PN/MM-SC/MM-ST/SS-SC models: 0.61 @12 VDC0.3 @ 24 VDC0.16@48 VDCEDS-408A-3M-SC/3M-ST/3S-SC/1M2S-SC/2M1S-SC models:0.73@12VDC0.35 @ 24 VDC0.18@48 VDC
EDS-408A-3S-SC-48 models: 0.33 A@24 VDC 0.17A@48 VDC |
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
Physical Characteristics
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 53.6 x135x105 mm (2.11 x 5.31 x 4.13 in) |
| Weight | EDS-408A, EDS-408A-MM-SC/MM-ST/SS-SC/EIP/PN models: 650 g (1.44 lb)EDS-408A-3M-SC/3M-ST/3S-SC/3S-SC-48/1M2S-SC/2M1S-SC models: 890 g (1.97 lb) |
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
Environmental Limits
| Operating Temperature | Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
Related products
-
MOXA EDS-G516E-4GSFP Gigabit Managed Industrial...
Features and Benefits Up to 12 10/100/1000BaseT(X) ports and 4 100/1000BaseSFP portsTurbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security Security features based on IEC 62443 EtherNet/IP, PROFINET, and Modbus TCP protocols suppo...
-
MOXA CN2610-16 Terminal Server
Introduction Redundancy is an important issue for industrial networks, and various types of solutions have been developed to provide alternative network paths when equipment or software failures occur. “Watchdog” hardware is installed to utilize redundant hardware, and a “Token”- switching software mechanism is applied. The CN2600 terminal server uses its built-in Dual-LAN ports to implement a “Redundant COM” mode that keeps your applic...
-
MOXA NPort 5130 Industrial General Device Server
Features and Benefits Small size for easy installation Real COM and TTY drivers for Windows, Linux, and macOS Standard TCP/IP interface and versatile operation modes Easy-to-use Windows utility for configuring multiple device servers SNMP MIB-II for network management Configure by Telnet, web browser, or Windows utility Adjustable pull high/low resistor for RS-485 ports ...
-
MOXA ICF-1150-S-SC-T Serial-to-Fiber Converter
Features and Benefits 3-way communication: RS-232, RS-422/485, and fiber Rotary switch to change the pull high/low resistor value Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode -40 to 85°C wide-temperature range models available C1D2, ATEX, and IECEx certified for harsh industrial environments Specifications ...
-
MOXA ICS-G7526A-2XG-HV-HV-T Gigabit Managed Eth...
Introduction Process automation and transportation automation applications combine data, voice, and video, and consequently require high performance and high reliability. The ICS-G7526A Series full Gigabit backbone switches are equipped with 24 Gigabit Ethernet ports plus up to 2 10G Ethernet ports, making them ideal for large-scale industrial networks. The ICS-G7526A’s full Gigabit capability increases bandwidth ...
-
MOXA EDS-516A 16-port Managed Industrial Ethern...
Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancyTACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 Supports MXstudio for easy, visualized industrial network management ...