• head_banner_01

Hirschmann RS30-2402O6O6SDAE Compact Switch

Short Description:

Fast Ethernet Ports with/without PoE The RS20 compact OpenRail managed Ethernet switches can accommodate from 4 to 25 port densities and are available with different Fast Ethernet uplink ports – all copper, or 1, 2 or 3 fiber ports. The fiber ports are available in multimode and/or singlemode. Gigabit Ethernet Ports with/without PoE The RS30 compact OpenRail managed Ethernet switches can accommodate from 8 to 24 port densities with 2 Gigabit ports and 8, 16 or 24 Fast Ethernet ports. The configuration includes 2 Gigabit ports with TX or SFP slots. The RS40 compact OpenRail managed Ethernet switches can accommodate 9 Gigabit ports. The configuration includes 4 x Combo Ports (10/100/1000BASE TX RJ45 plus FE/GE-SFP slot) and 5 x 10/100/1000BASE TX RJ45 ports


Product Detail

Product Tags

Commerial Date

 

Product description
Description 26 port Gigabit/Fast-Ethernet-Switch (2 x Gigabit Ethernet, 24 x Fast Ethernet), managed, software Layer 2 Enhanced, for DIN rail store-and-forward-switching,

fanless design

Port type and quantity 26 Ports in total, 2 Gigabit Ethernet ports; 1. uplink: Gigabit SFP-Slot; 2. uplink: Gigabit SFP-Slot; 24 x standard 10/100 BASE TX, RJ45
More Interfaces
Power supply/signaling contact 1 x plug-in terminal block, 6-pin
V.24 interface 1 x RJ11 socket
USB interface 1 x USB to connect the AutoConfiguration Adapter ACA21-USB
Network size - length of cable
Multimode fiber (MM) 50/125 µm cf. SFP LWL module M-SFP-SX/LC and M-SFP-LX/LC
Multimode fiber (MM) 62.5/125 µm cf. SFP LWL module M-SFP-SX/LC and M-SFP-LX/LC
Single mode fiber (SM) 9/125 µm cf. SFP LWL module M-SFP-LX/LC
Single mode fiber (LH) 9/125 µm (long haul

transceiver)

cf. SFP LWL module M-SFP-LH/LC und M-SFP-LH+/LC
Network size - cascadibility
Line - / star topology any
Ring structure (HIPER-Ring) quantity switches 50 (reconfiguration time < 0.3 sec.)
Power requirements
Operating voltage 12/24/48 V DC (9,6-60) V and 24 V AC (18-30) V (redundant)
Current consumption at 24 V DC 628 mA
Current consumption at 48 V DC 313 mA
Power output in Btu (IT) h 51.6
Software
Management Serial interface, web interface, SNMP V1/V2, HiVision file transfer SW HTTP/TFTP
Diagnostics LEDs, log-file, relay contact, RMON, port mirroring 1:1, topology discovery 802.1AB, address conflict detection, network error detection, SFP diagnostic

[temperature, optical input and output power (µW and dBm)], Trap for configuration saving and changing, duplex mismatch detection, disable learning.

Configuration Comand line interface (CLI), TELNET, BootP, DHCP, DHCP option 82, HIDiscovery, easy device exchange with auto-configuration adapter ACA21-USB (automatic

software and/or configuration upload), automatic invalid configuration undo, configuration signature (water marking)

Security Port Security (IP und MAC) with multiple addresses, SNMP V3 (no encryption)
Redundancy functions HIPER-ring (ring structure), MRP (IEC-ring functionality), RSTP 802.1D-2004, redundant network/ring coupling, MRP and RSTP in parallel, redundant 24 V power

supply

Filter QoS 4 classes, port priorisation (IEEE 802.1D/p), VLAN (IEEE 802.1Q), shared VLAN learning, multicast (IGMP Snooping/Querier), multicast detection unknown

multicast, broadcastlimiter, fast aging

Industrial Profiles EtherNet/IP and PROFINET (2.2 PDEV, GSDML stand-alone generator, automatic device exchange) profiles included, configuration and diagnostic via automation

software tools like e.g. STEP7, or Control Logix

Time synchronisation SNTP client/server, PTP / IEEE 1588
Flow control Flow control 802.3x, port priority 802.1D/p, priority (TOS/DIFFSERV)
Presettings Standard
Ambient conditions
Operating temperature 0 ºC ... 60 ºC
Storage/transport temperature -40 ºC ... 70 ºC
Relative humidity (non-condensing) 10 % ... 95 %
MTBF 33.5 years (MIL-HDBK-217F)
Protective paint on PCB No
Mechanical construction
Dimensions (W x H x D) 110 mm x 131 mm x 111 mm
Mounting DIN Rail
Weight 600 g
Protection class IP20
Mechanical stability
IEC 60068-2-27 shock 15 g, 11 ms duration, 18 shocks
IEC 60068-2-6 vibration 1 mm, 2 Hz-13.2 Hz, 90 min.; 0.7 g, 13.2 Hz-100 Hz, 90 min.; 3.5 mm, 3 Hz-9 Hz, 10 cycles, 1 octave/min.; 1 g, 9 Hz-150 Hz, 10 cycles, 1 octave/min
EMC interference immunity
EN 61000-4-2 electrostatic discharge (ESD) 6 kV contact discharge, 8 kV air discharge
EN 61000-4-3 electromagnetic field 10 V/m (80-1000 MHz)
EN 61000-4-4 fast transients (burst) 2 kV power line, 1 kV data line
EN 61000-4-5 surge voltage power line: 2 kV (line/earth), 1 kV (line/line), 1 kV data line
EN 61000-4-6 conducted immunity 3 V (10 kHz-150 kHz), 10 V (150 kHz-80 MHz)
EMC emitted immunity
FCC CFR47 Part 15 FCC 47 CFR Part 15 Class A
EN 55022 EN 55022 Class A
Approvals
Safety of industrial control equipment cUL 508
Hazardous locations ISA 12.12.01 Class 1 Div. 2
Shipbuilding n/a
Railway norm n/a
Substation n/a

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Hirschmann OCTOPUS-5TX EEC Supply Voltage 24 VDC Unmanged Switch

      Hirschmann OCTOPUS-5TX EEC Supply Voltage 24 VD...

      Introduction OCTOPUS-5TX EEC is unmanaged IP 65 / IP 67 switch in accordance with IEEE 802.3, store-and-forward-switching, Fast-Ethernet (10/100 MBit/s) ports, electrical Fast-Ethernet (10/100 MBit/s) M12-ports Product description Type OCTOPUS 5TX EEC Description The OCTOPUS switches are suited for outdoor appl...

    • Hirschmann RS20-0800M4M4SDAE Managed Switch

      Hirschmann RS20-0800M4M4SDAE Managed Switch

      Description   Product: RS20-0800M4M4SDAE Configurator: RS20-0800M4M4SDAE     Product description   Description Managed Fast-Ethernet-Switch for DIN rail store-and-forward-switching, fanless design ; Software Layer 2 Enhanced       Part Number 943434017       Port type and quantity 8 ports in total: 6 x standard 10/100 BASE TX, RJ45 ; Uplink 1: 1 x 100BASE-FX, MM-ST ; Uplink 2: 1 x 100BASE-...

    • Hirschmann MSP30-24040SCY999HHE2A Modular Industrial DIN Rail Ethernet Switch

      Hirschmann MSP30-24040SCY999HHE2A Modular Indus...

      Introduction The MSP switch product range offers complete modularity and various high-speed port options with up to 10 Gbit/s. Optional Layer 3 software packages for dynamic unicast routing (UR) and dynamic multicast routing (MR) offer you an attractive cost benefit – "Just pay for what you need." Thanks to Power over Ethernet Plus (PoE+) support, terminal equipment can also be powered cost-effectively. The MSP30 ...

    • Hirschmann RSP35-08033O6TT-SKKV9HPE2S managed switch

      Hirschmann RSP35-08033O6TT-SKKV9HPE2S managed s...

      Product description   Configurator Description The RSP series features hardened, compact managed industrial DIN rail switches with Fast and Gigabit speed options. These switches support comprehensive redundancy protocols like PRP (Parallel Redundancy Protocol), HSR (High-availability Seamless Redundancy), DLR (Device Level Ring) and FuseNet™ and provide an optimum degree of flexibility with several thousand v...

    • Hirschmann MM3 – 2FXS2/2TX1 Media module

      Hirschmann MM3 – 2FXS2/2TX1 Media module

      Description   Type: MM3-2FXS2/2TX1   Part Number: 943762101   Port type and quantity: 2 x 100BASE-FX, SM cables, SC sockets, 2 x 10/100BASE-TX, TP cables, RJ45 sockets, auto-crossing, auto-negotiation, auto-polarity     Network size - length of cable Twisted pair (TP): 0-100   Single mode fiber (SM) 9/125 µm: 0 -32.5 km, 16 dB link budget at 1300 nm, A = 0.4 dB/km, 3 dB reserve, D = 3.5 ...

    • Hirschmann MAR1020-99TTTTTTTTTTTT999999999999SMMHPHH Switch

      Hirschmann MAR1020-99TTTTTTTTTTTT999999999999SM...

      Product description   Product description Description Industrial managed Fast Ethernet Switch according to IEEE 802.3, 19" rack mount, fanless Design, Store-and-Forward-Switching Port type and quantity In total 12 Fast Ethernet ports \\\ FE 1 and 2: 10/100BASE-TX, RJ45 \\\ FE 3 and 4: 10/100BASE-TX, RJ45 \\\ FE 5 and 6: 10/100BASE-TX, RJ45 \\\ FE 7 and 8: 10/100BASE-TX, RJ45 \\\ FE 9 and 10: 10/100BASE-TX, RJ45 \\\ FE 11 and 12: 10/1...