• head_banner_01

MOXA TCF-142-S-SC Industrial Serial-to-Fiber Converter

Short Description:

The TCF-142 media converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multimode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 converters can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.


Product Detail

Product Tags

Features and Benefits

Ring and point-to-point transmission

Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M)

Decreases signal interference

Protects against electrical interference and chemical corrosion

Supports baudrates up to 921.6 kbps

Wide-temperature models available for -40 to 75°C environments

Specifications

 

Serial Signals

RS-232 TxD, RxD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND

 

Power Parameters

No. of Power Inputs 1
Input Current 70to140 mA@12to 48 VDC
Input Voltage 12to48 VDC
Overload Current Protection Supported
Power Connector Terminal block
Power Consumption 70to140 mA@12to 48 VDC
Reverse Polarity Protection Supported

 

Physical Characteristics

IP Rating IP30
Housing Metal
Dimensions (with ears) 90x100x22 mm (3.54 x 3.94 x 0.87 in)
Dimensions (without ears) 67x100x22 mm (2.64 x 3.94 x 0.87 in)
Weight 320 g (0.71 lb)
Installation Wall mounting

 

Environmental Limits

Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

 

MOXA TCF-142-S-SC  Available Models

Model Name

OperatingTemp.

FiberModule Type

TCF-142-M-ST

0 to 60°C

Multi-mode ST

TCF-142-M-SC

0 to 60°C

Multi-mode SC

TCF-142-S-ST

0 to 60°C

Single-mode ST

TCF-142-S-SC

0 to 60°C

Single-mode SC

TCF-142-M-ST-T

-40 to 75°C

Multi-mode ST

TCF-142-M-SC-T

-40 to 75°C

Multi-mode SC

TCF-142-S-ST-T

-40 to 75°C

Single-mode ST

TCF-142-S-SC-T

-40 to 75°C

Single-mode SC

 

 


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • MOXA DE-311 General Device Server

      MOXA DE-311 General Device Server

      Introduction The NPortDE-211 and DE-311 are 1-port serial device servers that support RS-232, RS-422, and 2-wire RS-485. The DE-211 supports 10 Mbps Ethernet connections and has a DB25 female connector for the serial port. The DE-311 supports 10/100 Mbps Ethernet connections and has a DB9 female connector for the serial port. Both device servers are ideal for applications that involve information display boards, PLCs, flow meters, gas meters,...

    • MOXA MGate MB3660-16-2AC Modbus TCP Gateway

      MOXA MGate MB3660-16-2AC Modbus TCP Gateway

      Features and Benefits Supports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Innovative Command Learning for improving system performance Supports agent mode for high performance through active and parallel polling of serial devices Supports Modbus serial master to Modbus serial slave communications 2 Ethernet ports with the same IP or dual IP addresses...

    • MOXA EDS-208A-M-SC 8-port Compact Unmanaged Industrial Ethernet Switch

      MOXA EDS-208A-M-SC 8-port Compact Unmanaged Ind...

      Features and Benefits 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/single-mode, SC or ST connector) Redundant dual 12/24/48 VDC power inputs IP30 aluminum housing Rugged hardware design well suited for hazardous locations (Class 1 Div. 2/ATEX Zone 2), transportation (NEMA TS2/EN 50121-4/e-Mark), and maritime environments (DNV/GL/LR/ABS/NK) -40 to 75°C operating temperature range (-T models) ...

    • MOXA EDS-208A 8-port Compact Unmanaged Industrial Ethernet Switch

      MOXA EDS-208A 8-port Compact Unmanaged Industri...

      Features and Benefits 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/single-mode, SC or ST connector) Redundant dual 12/24/48 VDC power inputs IP30 aluminum housing Rugged hardware design well suited for hazardous locations (Class 1 Div. 2/ATEX Zone 2), transportation (NEMA TS2/EN 50121-4/e-Mark), and maritime environments (DNV/GL/LR/ABS/NK) -40 to 75°C operating temperature range (-T models) ...

    • MOXA EDS-405A Entry-level Managed Industrial Ethernet Switch

      MOXA EDS-405A Entry-level Managed Industrial Et...

      Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial net...

    • MOXA MGate 5111 gateway

      MOXA MGate 5111 gateway

      Introduction MGate 5111 industrial Ethernet gateways convert data from Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET to PROFIBUS protocols. All models are protected by a rugged metal housing, are DIN-rail mountable, and offer built-in serial isolation. The MGate 5111 Series has a user-friendly interface that lets you quickly set up protocol conversion routines for most applications, doing away with what were often time-consum...