Weidmuller WQV 2.5/10 1054460000 Terminals Cross-connector
Weidmüller offers plug-in and screwed cross-connection systems for screw-connection
terminal blocks. The plug-in cross-connections feature easy handling and quick installation.
This saves a great deal of time during installation in comparison with screwed solutions. This also ensures that all poles always contact reliably.
Fitting and changing cross connections
The fitting and changing of cross-connections is a trouble-free and fast operation:
– Insert the cross-connection into the cross connection channel in the terminal...and press it fully home. (The cross-connection may not project from the channel.) Remove a cross-connection by simply prising it out with a screwdriver.
Shortening cross-connections
Cross-connections can be shortened in length using a suitable cutting tool, However, three contact elements must always be retained.
Breaking out contact elements
If one or more (max. 60 % for reasons of stability and temperature rise) of the contact elements are broken out of the cross-connections, terminals may be bypassed to suit the application.
Caution:
Contact elements must not be deformed!
Note: By using manually cut ZQV and crossconnections with blank cut edges (> 10 poles) the voltage reduces to 25 V.
Related products
-
WAGO 2016-1301 3-conductor Through Terminal Block
Date Sheet Connection data Connection points 3 Total number of potentials 1 Number of levels 1 Number of jumper slots 2 Connection 1 Connection technology Push-in CAGE CLAMP® Actuation type Operating tool Connectable conductor materials Copper Nominal cross-section 16 mm² Solid conductor 0.5 … 16 mm² / 20 … 6 AWG Solid conductor; push-in termination 6 … 16 mm² / 14 … 6 AWG Fine-stranded conductor 0.5 … 25 mm² ...
-
Weidmuller APGTB 2.5 PE 2C/1 1513870000 PE Term...
Weidmuller’s A series terminal blocks characters Spring connection with PUSH IN technology (A-Series) Time saving 1.Mounting foot makes unlatching the terminal block easy 2. Clear distinction made between all functional areas 3.Easier marking and wiring Space saving design 1.Slim design creates a large amount of space in the panel 2.High wiring density despite less space being required on the terminal rail Safety...
-
Hirschmann M-SFP-LH/LC-EEC SFP Transceiver
Commerial Date Hirschmann M-SFP-LH/LC-EEC SFP Product description Type: M-SFP-LH/LC-EEC Description: SFP Fiberoptic Gigabit Ethernet Transceiver LH, extended temperature range Part Number: 943898001 Port type and quantity: 1 x 1000 Mbit/s with LC connector Network size - length of cable Single mode fiber (LH) 9/125 µm (long haul transceiver): 23 - 80 km (Link Budget at 1550 n...
-
Weidmuller ACT20P-VI1-CO-OLP-S 7760054120 Signa...
Weidmuller Analogue Signal Conditioning series: Weidmuller meets the ever increasing challenges of automation and offers a product portfolio tailored to the requirements of handling sensor signals in analogue signal processing, include series ACT20C. ACT20X. ACT20P. ACT20M. MCZ. PicoPak .WAVE etc. The analogue signal processing products can be used universally in combination with other Weidmuller products and in combination among each o...
-
MOXA EDS-G205A-4PoE-1GSFP 5-port POE Industrial...
Features and Benefits Full Gigabit Ethernet ports IEEE 802.3af/at, PoE+ standards Up to 36 W output per PoE port 12/24/48 VDC redundant power inputs Supports 9.6 KB jumbo frames Intelligent power consumption detection and classification Smart PoE overcurrent and short-circuit protection -40 to 75°C operating temperature range (-T models) Specifications ...
-
Weidmuller ACT20P-CML-10-AO-RC-S 2044850000 Cur...
Datasheet General ordering data Version Fuse terminal, Screw connection, dark beige, 6 mm², 6.3 A, 250 V, Number of connections: 2, Number of levels: 1, TS 35 Order No. 1012400000 Type WSI 6/LD 250AC GTIN (EAN) 4008190139834 Qty. 10 items Dimensions and weights Depth 71.5 mm Depth (inches) 2.815 inch Depth including DIN rail 72 mm Height 60 mm Height (inches) 2.362 inch Width 7.9 mm Widt...