• head_banner_01

Weidmuller TS 35X7.5/LL 2M/ST/ZN 0514500000 Terminal Rail

Short Description:

Weidmuller TS 35X7.5/LL 2M/ST/ZN 0514500000 is Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 7.5 mm

Item No.0514500000


  • :
  • Product Detail

    Product Tags

    Datasheet

     

    General ordering data

    Version Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 7.5 mm  
    Order No. 0514500000  
    Type TS 35X7.5/LL 2M/ST/ZN  
    GTIN (EAN) 4008190046019  
    Qty. 40  

     

     

    Dimensions and weights

    Depth 7.5  mm
    Depth (inches) 0.295  inch
    Height 35  mm
    Height (inches) 1.378  inch
    Width 2,000  mm
    Width (inches) 78.74  inch
    Net weight 15.75  g

     

     

    Temperatures

    Ambient temperature -5 °C40 °C  

     

     

    Environmental Product Compliance

    RoHS Compliance Status Compliant without exemption  
    REACH SVHC No SVHC above 0.1 wt%  

     

     

     

    Mounting rail

    Drill-hole diameter 5.2  mm
    Installation advice Direct mounting  
    Length of the terminal rail  

    min.:

     

    0 mm

     

     

    nominal:

     

    2,000 mm

     

     

    max.:

     

    2,000 mm

     

    Material Steel  
    Pre-punched mounting rail Yes  
    Short circuit strength corresponds to E-Cu wire 16  mm²
    Short-time withstand current per second according to IEC 60947-7-2 1.92  kA
    Slit gap 11  mm
    Slit gap  

    min.:

     

    11 mm

     

     

    nominal:

     

    11 mm

     

     

    max.:

     

    11 mm

     

    Slit length 25  mm
    Slit length  

    min.:

     

    25 mm

     

     

    nominal:

     

    25 mm

     

     

    max.:

     

    25 mm

     

    Slit width 5.2  mm
    Slit width  

    min.:

     

    5.2 mm

     

     

    nominal:

     

    5.2 mm

     

     

    max.:

     

    5.2 mm

     

    Slotted drill holes Yes  
    Solder eyelet hole diameter (D) 5.2  mm
    Spacing of holes, centre-to-centre 36  mm
    Standards DIN EN 60715  
    Surface finish galvanic zinc plated and passivated  
    Thickness 1  mm

    Weidmuller TS 35X7.5/LL 2M/ST/ZN 0514500000 Related Models

     

    Order No Type
    1071690000 TS 35X7.5/LL/6X18 2M/O

     

    1805980000 TS 35X15/6X18 2M/ST/ZN

     

    1879090000 TS 35X7.5/5X18 2M/ST/SZ

     

    1071680000 TS 35X15/LL 2M/ST/ZN/O

     

    7915060000 TS 35X7.5/LL 2M/ST/SZ

     

    0236500000 TS 35X15/LL 2M/ST/ZN

     

    1866290000 TS 35X15/6X25 2M/ST/ZN

     

    0383410000 TS 35X7.5 1M/ST/ZN

     

    0514570000 TS 35X7.5/LL/6 2M/ST/ZN

     

    1879100000 TS 35X15/5X18 2M/ST/SZ

     

    0236400000 TS 35X15 2M/ST/ZN
    0514500000 TS 35X7.5/LL 2M/ST/ZN

     

    9300090000 TS 35X7.5 2M/ST/SZ

     

    0236510000 TS 35X15/LL 1M/ST/ZN

     

    0498000000 TS 35X15/2.3 2M/ST/ZN

     

    7907490000 TS 35X15/LL 2M/ST/SZ

     

    0383400000 TS 35X7.5 2M/ST/ZN

     

    1837380000 TS 35X15/5X18 2M/ST/ZN

     

    0514510000 TS 35X7.5/LL 1M/ST/ZN

     

     


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Weidmuller A2C 2.5 1521850000 Feed-through Terminal

      Weidmuller A2C 2.5 1521850000 Feed-through Term...

      Weidmuller’s A series terminal blocks characters Spring connection with PUSH IN technology (A-Series) Time saving 1.Mounting foot makes unlatching the terminal block easy 2. Clear distinction made between all functional areas 3.Easier marking and wiring Space saving design 1.Slim design creates a large amount of space in the panel 2.High wiring density despite less space being required on the terminal rail Safety...

    • WAGO 750-833 Controller PROFIBUS Slave

      WAGO 750-833 Controller PROFIBUS Slave

      Physical data   Width 50.5 mm / 1.988 inches Height 100 mm / 3.937 inches Depth 71.1 mm / 2.799 inches Depth from upper-edge of DIN-rail 63.9 mm / 2.516 inches Features and applications:   Decentralized control to optimize support for a PLC or PC Devide complex applications into individually testable units Programmable fault response in the event of fieldbus failure Signal pre-proc...

    • Weidmuller ZDU 2.5 1608510000 Terminal Block

      Weidmuller ZDU 2.5 1608510000 Terminal Block

      Weidmuller Z series terminal block characters: Time saving 1.Integrated test point 2.Simple handling thanks to parallel alignment of conductor entry 3.Can be wired without special tools Space saving 1.Compact design 2.Length reduced by up to 36 percent in roof style Safety 1.Shock and vibration proof• 2.Separation of electrical and mechanical functions 3.No-maintenance connection for a safe, gas-tight contacting...

    • Phoenix Contact PTTB 2,5-PE 3210596 Terminal Block

      Phoenix Contact PTTB 2,5-PE 3210596 Terminal Block

      Commerial Date   Item number 3210596 Packing unit 50 pc Minimum order quantity 50 pc Product key BE2224 GTIN 4046356419017 Weight per piece (including packing) 13.19 g Weight per piece (excluding packing) 12.6 g Customs tariff number 85369010 Country of origin CN       TECHNICAL DATE   Width 5.2 mm End cover width 2.2 mm Height 68 mm Depth on NS 35...

    • HIRSCHCHMANN RS20-0800T1T1SDAE Managed Switch

      HIRSCHCHMANN RS20-0800T1T1SDAE Managed Switch

      Introduction Fast Ethernet Ports with/without PoE The RS20 compact OpenRail managed Ethernet switches can accommodate from 4 to 25 port densities and are available with different Fast Ethernet uplink ports – all copper, or 1, 2 or 3 fiber ports. The fiber ports are available in multimode and/or singlemode. Gigabit Ethernet Ports with/without PoE The RS30 compact OpenRail managed Ethernet switches can accommodate f...

    • WAGO 750-554 Analog Ouput Module

      WAGO 750-554 Analog Ouput Module

      WAGO I/O System 750/753 Controller   Decentralized peripherals for a variety of applications: WAGO's remote I/O system has more than 500 I/O modules, programmable controllers and communication modules to provide automation needs and all communication buses required. All features.   Advantage: Supports the most communication buses – compatible with all standard open communication protocols and ETHERNET standards Wide range of I/O modules ...