English
  • head_banner_01

Weidmuller ACT20P-CI-CO-S 7760054114 Signal Converter/isolator

  • Weidmuller ACT20P-CI-CO-S 7760054114 Signal Converter/isolator
  • Weidmuller ACT20P-CI-CO-S 7760054114 Signal Converter/isolator
  • Weidmuller ACT20P-CI-CO-S 7760054114 Signal Converter/isolator
  • Weidmuller ACT20P-CI-CO-S 7760054114 Signal Converter/isolator

Short Description:

Weidmuller ACT20P-CI-CO-S 7760054114 is Signal converter/isolator, HART®, Input : 0(4)-20 mA, Output : 0(4)-20 mA.


  • :

    • Product Detail

    Product Tags

    Weidmuller Analogue Signal Conditioning series:

     

    Weidmuller meets the ever increasing challenges of automation and offers a product portfolio tailored to the requirements of handling sensor signals in analogue signal processing, include series ACT20C. ACT20X. ACT20P. ACT20M. MCZ. PicoPak .WAVE etc.
    The analogue signal processing products can be used universally in combination with other Weidmuller products and in combination among each other. Their electrical and mechanical design is such that they require only minimal wiring efforts.
    Housing types and wire-connection methods matched to the respective application facilitate the universal use in process and industrial automation applications.
    The product line includes the following functions:
    Isolating transformers, supply isolators and signal converters for DC standard signals
    Temperature measuring transducers for resistance thermometers and thermocouples,
    frequency converters,
    potentiometer-measuring-transducers,
    bridge measuring transducers (strain gauges)
    trip amplifiers and modules for monitoring electrical and non-electrical process variables
    AD/DA converters
    displays
    calibration devices
    The products mentioned are available as pure signal converters / isolation transducers, 2-way/3-way isolators, supply isolators, passive isolators or as trip amplifiers.

    Analogue Signal Conditioning

     

    When used for industrial monitoring applications, sensors can record ambience conditions. Sensor signals are used within the process to continually track changes to the area being monitored. Both digital and analogue signals can occur.

    Normally an electrical voltage or current value is produced which corresponds proportionally to the physical variables that are being monitored

    Analogue signal processing is required when automation processes have to constantly maintain or reach defined conditions. This is particularly significant for process automation applications. Standardised electrical signals are typically used for process engineering. Analogue standardised currents / voltage 0(4)...20 mA/ 0...10 V have established themselves as physical measurement and control variables.

    General ordering data

     

    Version Signal converter/isolator, HART®, Input : 0(4)-20 mA, Output : 0(4)-20 mA
    Order No. 7760054114
    Type ACT20P-CI-CO-S
    GTIN (EAN) 6944169656552
    Qty. 1 pc(s).

    Dimensions and weights

     

    Depth 113.7 mm
    Depth (inches) 4.476 inch
    Height 117.2 mm
    Height (inches) 4.614 inch
    Width 12.5 mm
    Width (inches) 0.492 inch
    Net weight 142 g

    Related products

     

    Order No. Type
    7760054114 ACT20P-CI-CO-S
    2489680000 ACT20P-CI-CO-P
    1506200000 ACT20P-CI-CO-P-S
    2514620000 ACT20P-CI-CO-P-P
  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • WAGO 2000-1301 3-conductor Through Terminal Block

      WAGO 2000-1301 3-conductor Through Terminal Block

      Date Sheet   Connection data Connection points 3 Total number of potentials 1 Number of levels 1 Number of jumper slots 2   Physical data Width 3.5 mm / 0.138 inches Height 58.2 mm / 2.291 inches Depth from upper-edge of DIN-rail 32.9 mm / 1.295 inches Wago Terminal Blocks   Wago terminals, also known as Wago connectors or clamps, represen...

      See more products >
    • WAGO 750-891 Controller Modbus TCP

      WAGO 750-891 Controller Modbus TCP

      Description   The Modbus TCP Controller can be used as a programmable controller within ETHERNET networks along with the WAGO I/O System. The controller supports all digital and analog input/output modules, as well specialty modules found within the 750/753 Series, and is suitable for data rates of 10/100 Mbit/s. Two ETHERNET interfaces and an integrated switch allow the fieldbus to be wired in a line topology, eliminating additional netw...

      See more products >
    • Phoenix Contact PT 2,5-QUATTRO-PE 3209594 Terminal Block

      Phoenix Contact PT 2,5-QUATTRO-PE 3209594 Termi...

      Commerial Date   Item number 3209594 Packing unit 50 pc Minimum order quantity 50 pc Product key BE2223 GTIN 4046356329842 Weight per piece (including packing) 11.27 g Weight per piece (excluding packing) 11.27 g Customs tariff number 85369010 Country of origin DE     TECHNICAL DATE   Product type Ground terminal block Product family PT Area of applicatio...

      See more products >
    • MOXA IMC-101G Ethernet-to-Fiber Media Converter

      MOXA IMC-101G Ethernet-to-Fiber Media Converter

      Introduction The IMC-101G industrial Gigabit modular media converters are designed to provide reliable and stable 10/100/1000BaseT(X)-to-1000BaseSX/LX/LHX/ZX media conversion in harsh industrial environments. The IMC-101G’s industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101G converter comes with a relay output warning alarm to help prevent damage and loss. ...

      See more products >
    • MOXA EDS-510E-3GTXSFP-T Layer 2 Managed Industrial Ethernet Switch

      MOXA EDS-510E-3GTXSFP-T Layer 2 Managed Industr...

      Features and Benefits 3 Gigabit Ethernet ports for redundant ring or uplink solutionsTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), STP/STP, and MSTP for network redundancyRADIUS, TACACS+, SNMPv3, IEEE 802.1x, HTTPS, SSH, and sticky MAC address to enhance network security Security features based on IEC 62443 EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and...

      See more products >
    • Hirschmann MM3 – 4FXS2 Media module

      Hirschmann MM3 – 4FXS2 Media module

      Description   Product description Type: MM3-2FXM2/2TX1   Part Number: 943761101   Port type and quantity: 2 x 100BASE-FX, MM cables, SC sockets, 2 x 10/100BASE-TX, TP cables, RJ45 sockets, auto-crossing, auto-negotiation, auto-polarity   Network size - length of cable Twisted pair (TP): 0-100   Multimode fiber (MM) 50/125 µm: 0 - 5000 m, 8 dB link budget at 1300 nm, A = 1 dB/km, 3 dB reserve,...

      See more products >
    Hit enter to search or ESC to close