WAGO 787-722 Power supply
Related products
-
WAGO 260-311 2-conductor Terminal Block
Date Sheet Connection data Connection points 2 Total number of potentials 1 Number of levels 1 Physical data Width 5 mm / 0.197 inches Height from the surface 17.1 mm / 0.673 inches Depth 25.1 mm / 0.988 inches Wago Terminal Blocks Wago terminals, also known as Wago connectors or clamps, represent a groundbreaking innovation in ...
-
MOXA MGate 5114 1-port Modbus Gateway
Features and Benefits Protocol conversion between Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 Supports IEC 60870-5-101 master/slave (balanced/unbalanced) Supports IEC 60870-5-104 client/server Supports Modbus RTU/ASCII/TCP master/client and slave/server Effortless configuration via web-based wizard Status monitoring and fault protection for easy maintenance Embedded traffic monitoring/diagnostic inf...
-
Weidmuller A3C 4 2051240000 Feed-through Terminal
Weidmuller’s A series terminal blocks characters Spring connection with PUSH IN technology (A-Series) Time saving 1.Mounting foot makes unlatching the terminal block easy 2. Clear distinction made between all functional areas 3.Easier marking and wiring Space saving design 1.Slim design creates a large amount of space in the panel 2.High wiring density despite less space being required on the terminal rail Safety...
-
MOXA TCC-80 Serial-to-Serial Converter
Introduction The TCC-80/80I media converters provide complete signal conversion between RS-232 and RS-422/485, without requiring an external power source. The converters support both half-duplex 2-wire RS-485 and full-duplex 4-wire RS-422/485, either of which can be converted between RS-232’s TxD and RxD lines. Automatic data direction control is provided for RS-485. In this case, the RS-485 driver is enabled automatically whe...
-
Phoenix Contact 2903158 TRIO-PS-2G/1AC/12DC/10 ...
Product description TRIO POWER power supplies with standard functionality The TRIO POWER power supply range with push-in connection has been perfected for use in machine building. All functions and the space-saving design of the single and three-phase modules are optimally tailored to the stringent requirements. Under challenging ambient conditions, the power supply units, which feature an extremely robust electrical and mechanical desi...
-
WAGO 750-310 Fieldbus Coupler CC-Link
Description This fieldbus coupler connects the WAGO I/O System as a slave to the CC-Link fieldbus. The fieldbus coupler detects all connected I/O modules and creates a local process image. This process image may include a mixed arrangement of analog (word-by-word data transfer) and digital (bit-by-bit data transfer) modules. The process image can be transferred via the CC‐Link fieldbus to the memory of the control system. The local proc...