| General information |
| Product type designation |
Front connector |
| connection method / header |
| Connection I/O signals |
| • Connection method |
Screw terminals |
| • Number of lines per connection |
1; or combination of 2 conductors of up to 1.5 mm2 (total) in a shared
ferrule |
| Conductor cross-section in mm2 |
| —Connectable cable cross-sections for massive cables, min. |
0.25 mm2 |
| —Connectable cable cross-sections for massive cables, min. |
1.5 mm2 |
| —Connectable cable cross-sections for flexible cables without end sleeve, min. |
0.25 mm2 |
| —Connectable cable cross-sections for flexible cables without end sleeve, max. |
1.5 mm2 |
| —Connectable cable cross-sections for flexible cables with end sleeve, min. |
0.25 mm2 |
| —Connectable cable cross-sections for flexible cables with end sleeve, max. |
1.5 mm2 |
| Conductor cross-section acc. to AWG |
| —Connectable cable cross-sections for massive cables, min. |
24 |
| —Connectable cable cross-sections for massive cables, min. |
16 |
| —Connectable cable cross-sections for flexible cables without end sleeve, min. |
24 |
| —Connectable cable cross-sections for flexible cables without end sleeve, max. |
16 |
| —Connectable cable cross-sections for flexible cables with end sleeve, min. |
24 |
| —Connectable cable cross-sections for flexible cables with end sleeve, max. |
16 |
| Wire end processing |
| —Stripped length of cables, min. |
10 mm |
| —Stripped length of cables, max. |
11 mm |
| —End sleeve acc. to DIN 46228 without plastic sleeve |
Form A, 10 mm and 12 mm long |
| —End sleeve acc. to DIN 46228 with plastic sleeve |
Form E, 10 mm and 12 mm long |
| Mounting |
| —Tool |
Screwdriver, conical design, 3 mm to 3.5 mm |
| —Tightening torque, min. |
0.4 N-m |
| —Tightening torque, max. |
0.7 N-m |