• head_banner_01

MOXA TCF-142-M-SC Industrial Serial-to-Fiber Converter

Short Description:

The TCF-142 media converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multimode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 converters can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.


Product Detail

Product Tags

Features and Benefits

Ring and point-to-point transmission

Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF- 142-S) or 5 km with multi-mode (TCF-142-M)

Decreases signal interference

Protects against electrical interference and chemical corrosion

Supports baudrates up to 921.6 kbps

Wide-temperature models available for -40 to 75°C environments

Specifications

 

Serial Signals

RS-232 TxD, RxD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND

 

Power Parameters

No. of Power Inputs 1
Input Current 70to140 mA@12to 48 VDC
Input Voltage 12to48 VDC
Overload Current Protection Supported
Power Connector Terminal block
Power Consumption 70to140 mA@12to 48 VDC
Reverse Polarity Protection Supported

 

Physical Characteristics

IP Rating IP30
Housing Metal
Dimensions (with ears) 90x100x22 mm (3.54 x 3.94 x 0.87 in)
Dimensions (without ears) 67x100x22 mm (2.64 x 3.94 x 0.87 in)
Weight 320 g (0.71 lb)
Installation Wall mounting

 

Environmental Limits

Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

 

MOXA TCF-142-M-SC  Available Models

Model Name

OperatingTemp.

FiberModule Type

TCF-142-M-ST

0 to 60°C

Multi-mode ST

TCF-142-M-SC

0 to 60°C

Multi-mode SC

TCF-142-S-ST

0 to 60°C

Single-mode ST

TCF-142-S-SC

0 to 60°C

Single-mode SC

TCF-142-M-ST-T

-40 to 75°C

Multi-mode ST

TCF-142-M-SC-T

-40 to 75°C

Multi-mode SC

TCF-142-S-ST-T

-40 to 75°C

Single-mode ST

TCF-142-S-SC-T

-40 to 75°C

Single-mode SC

 

 


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • MOXA EDS-2018-ML-2GTXSFP Gigabit Unmanaged Ethernet Switch

      MOXA EDS-2018-ML-2GTXSFP Gigabit Unmanaged Ethe...

      Features and Benefits 2 Gigabit uplinks with flexible interface design for high-bandwidth data aggregationQoS supported to process critical data in heavy traffic Relay output warning for power failure and port break alarm IP30-rated metal housing Redundant dual 12/24/48 VDC power inputs -40 to 75°C operating temperature range (-T models) Specifications ...

    • MOXA IMC-21GA-LX-SC Ethernet-to-Fiber Media Converter

      MOXA IMC-21GA-LX-SC Ethernet-to-Fiber Media Con...

      Features and Benefits Supports 1000Base-SX/LX with SC connector or SFP slot Link Fault Pass-Through (LFPT) 10K jumbo frame Redundant power inputs -40 to 75°C operating temperature range (-T models) Supports Energy-Efficient Ethernet (IEEE 802.3az) Specifications Ethernet Interface 10/100/1000BaseT(X) Ports (RJ45 connector...

    • MOXA IKS-6728A-8PoE-4GTXSFP-HV-HV-T 24+4G-port Gigabit Modular Managed PoE Industrial Ethernet Switch

      MOXA IKS-6728A-8PoE-4GTXSFP-HV-HV-T 24+4G-port ...

      Features and Benefits 8 built-in PoE+ ports compliant with IEEE 802.3af/at (IKS-6728A-8PoE) Up to 36 W output per PoE+ port (IKS-6728A-8PoE) Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches) , and STP/RSTP/MSTP for network redundancy 1 kV LAN surge protection for extreme outdoor environments PoE diagnostics for powered-device mode analysis 4 Gigabit combo ports for high-bandwidth communicatio...

    • MOXA SFP-1FEMLC-T 1-port Fast Ethernet SFP Module

      MOXA SFP-1FEMLC-T 1-port Fast Ethernet SFP Module

      Introduction Moxa's small form-factor pluggable transceiver (SFP) Ethernet fiber modules for Fast Ethernet provide coverage across a wide range of communication distances. The SFP-1FE Series 1-port Fast Ethernet SFP modules are available as optional accessories for a wide range of Moxa Ethernet switches. SFP module with 1 100Base multi-mode, LC connector for 2/4 km transmission, -40 to 85°C operating temperature. ...

    • MOXA EDS-208A-S-SC 8-port Compact Unmanaged Industrial Ethernet Switch

      MOXA EDS-208A-S-SC 8-port Compact Unmanaged Ind...

      Features and Benefits 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/single-mode, SC or ST connector) Redundant dual 12/24/48 VDC power inputs IP30 aluminum housing Rugged hardware design well suited for hazardous locations (Class 1 Div. 2/ATEX Zone 2), transportation (NEMA TS2/EN 50121-4/e-Mark), and maritime environments (DNV/GL/LR/ABS/NK) -40 to 75°C operating temperature range (-T models) ...

    • MOXA EDS-510A-3SFP-T Layer 2 Managed Industrial Ethernet Switch

      MOXA EDS-510A-3SFP-T Layer 2 Managed Industrial...

      Features and Benefits 2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet port for uplink solutionTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 ...