• head_banner_01

MOXA MGate MB3660-8-2AC Modbus TCP Gateway

Short Description:

The MGate MB3660 (MB3660-8 and MB3660-16) gateways are redundant Modbus gateways that convert between the Modbus TCP and Modbus RTU/ASCII protocols. They can be accessed by up to 256 TCP master/client devices, or connect to 128 TCP slave/server devices. The MGate MB3660 isolation model provides 2 kV isolation protection suitable for power substation applications. The MGate MB3660 gateways are designed to easily integrate Modbus TCP and RTU/ASCII networks. The MGate MB3660 gateways offer features that make network integration easy, customizable, and compatible with almost any Modbus network.

For large-scale Modbus deployments, MGate MB3660 gateways can effectively connect a large number of Modbus nodes to the same network. The MB3660 Series can physically manage up to 248 serial slave nodes for 8-port models or 496 serial slave nodes for 16-port models (the Modbus standard only defines Modbus IDs from 1 to 247). Each RS-232/422/485 serial port can be configured individually for Modbus RTU or Modbus ASCII operation and for different baudrates, allowing both types of networks to be integrated with Modbus TCP through one Modbus gateway.


Product Detail

Product Tags

Features and Benefits

Supports Auto Device Routing for easy configuration
Supports route by TCP port or IP address for flexible deployment
Innovative Command Learning for improving system performance
Supports agent mode for high performance through active and parallel polling of serial devices
Supports Modbus serial master to Modbus serial slave communications
2 Ethernet ports with the same IP or dual IP addresses for network redundancy
SD card for configuration backup/duplication and event logs
Accessed by up to 256 Modbus TCP clients
Connects up to Modbus 128 TCP servers
RJ45 serial interface (for “-J” models)
Serial port with 2 kV isolation protection (for “-I” models)
Dual VDC or VAC power inputs with wide power input range
Embedded traffic monitoring/diagnostic information for easy troubleshooting
Status monitoring and fault protection for easy maintenance

Specifications

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector) 2 IP addresses Auto MDI/MDI-X connection

Power Parameters

Input Voltage All models: Redundant dual inputsAC models: 100 to 240 VAC (50/60 Hz)

DC models: 20 to 60 VDC (1.5 kV isolation)

No. of Power Inputs 2
Power Connector Terminal block (for DC models)
Power Consumption MGateMB3660-8-2AC: 109 mA@110 VACMGateMB3660I-8-2AC: 310mA@110 VAC

MGate MB3660-8-J-2AC: 235 mA@110 VAC MGate MB3660-8-2DC: 312mA@ 24 VDC MGateMB3660-16-2AC: 141 mA@110VAC MGate MB3660I-16-2AC: 310mA@110 VAC

MGate MB3660-16-J-2AC: 235 mA @ 110VAC

MGate MB3660-16-2DC: 494 mA @ 24 VDC

Relays

Contact Current Rating Resistive load: 2A@30 VDC

Physical Characteristics

Housing Metal
IP Rating IP30
Dimensions (with ears) 480x45x198 mm (18.90x1.77x7.80 in)
Dimensions (without ears) 440x45x198 mm (17.32x1.77x7.80 in)
Weight MGate MB3660-8-2AC: 2731 g (6.02 lb)MGate MB3660-8-2DC: 2684 g (5.92 lb)

MGate MB3660-8-J-2AC: 2600 g (5.73 lb)

MGate MB3660-16-2AC: 2830 g (6.24 lb)

MGate MB3660-16-2DC: 2780 g (6.13 lb)

MGate MB3660-16-J-2AC: 2670 g (5.89 lb)

MGate MB3660I-8-2AC: 2753 g (6.07 lb)

MGate MB3660I-16-2AC: 2820 g (6.22 lb)

Environmental Limits

Operating Temperature 0to 60°C(32 to140°F)
Storage Temperature (package included) -40 to 85°C (-40 to185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

MOXA MGate MB3660-8-2AC Available Models

Model 1 MOXA MGate MB3660-8-J-2AC
Model 2 MOXA MGate MB3660I-16-2AC
Model 3 MOXA MGate MB3660-16-J-2AC
Model 4 MOXA MGate MB3660-8-2AC
Model 5 MOXA MGate MB3660-8-2DC
Model 6 MOXA MGate MB3660I-8-2AC
Model 7 MOXA MGate MB3660-16-2AC
Model 8 MOXA MGate MB3660-16-2DC

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • MOXA AWK-4131A-EU-T WLAN AP/Bridge/Client

      MOXA AWK-4131A-EU-T WLAN AP/Bridge/Client

      Introduction The AWK-4131A IP68 outdoor industrial AP/bridge/client meets the growing need for faster data transmission speeds by supporting 802.11n technology and allowing 2X2 MIMO communication with a net data rate of up to 300 Mbps. The AWK-4131A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the ...

    • MOXA TSN-G5004 4G-port full Gigabit managed Ethernet switch

      MOXA TSN-G5004 4G-port full Gigabit managed Eth...

      Introduction The TSN-G5004 Series switches are ideal for making manufacturing networks compatible with the vision of Industry 4.0. The switches are equipped with 4 Gigabit Ethernet ports. The full Gigabit design makes them a good choice for upgrading an existing network to Gigabit speed or for building a new full-Gigabit backbone for future high-bandwidth applications. The compact design and user-friendly configur...

    • MOXA EDS-505A 5-port Managed Industrial Ethernet Switch

      MOXA EDS-505A 5-port Managed Industrial Etherne...

      Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 Supports MXstudio for easy, visualized industrial network management ...

    • MOXA MGate MB3170-T Modbus TCP Gateway

      MOXA MGate MB3170-T Modbus TCP Gateway

      Features and Benefits Supports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Connects up to 32 Modbus TCP servers Connects up to 31 or 62 Modbus RTU/ASCII slaves Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for each Master) Supports Modbus serial master to Modbus serial slave communications Built-in Ethernet cascading for easy wir...

    • MOXA IMC-21A-M-ST-T Industrial Media Converter

      MOXA IMC-21A-M-ST-T Industrial Media Converter

      Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFPT) -40 to 75°C operating temperature range (-T models) DIP switches to select FDX/HDX/10/100/Auto/Force Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 1 100BaseFX Ports (multi-mode SC conne...

    • MOXA A52-DB9F w/o Adapter converter with DB9F cable

      MOXA A52-DB9F w/o Adapter converter with DB9F c...

      Introduction   The A52 and A53 are general RS-232 to RS-422/485 converters designed for users who need to extend RS-232 transmission distance and increase networking capability. Features and Benefits Automatic Data Direction Control (ADDC) RS-485 data control Automatic baudrate detection RS-422 hardware flow control: CTS, RTS signals LED indicators for power and signal...