• head_banner_01

MOXA ioLogik E2212 Universal Controller Smart Ethernet Remote I/O

Short Description:

Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.


Product Detail

Product Tags

Features and Benefits

Front-end intelligence with Click&Go control logic, up to 24 rules
Active communication with MX-AOPC UA Server
Saves time and wiring costs with peer-to-peer communications
Supports SNMP v1/v2c/v3
Friendly configuration via web browser
Simplifies I/O management with MXIO library for Windows or Linux
Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments

Specifications

Control Logic

Language Click&Go

Input/Output Interface

Digital Input Channels ioLogikE2210Series: 12 ioLogikE2212Series:8 ioLogikE2214Series:6
Digital Output Channels ioLogik E2210/E2212 Series: 8ioLogik E2260/E2262 Series: 4
Configurable DIO Channels (by software) ioLogik E2212 Series: 4ioLogik E2242 Series: 12
Relay Channels ioLogikE2214Series:6
Analog Input Channels ioLogik E2240 Series: 8ioLogik E2242 Series: 4
Analog Output Channels ioLogik E2240 Series: 2
RTD Channels ioLogik E2260 Series: 6
Thermocouple Channels ioLogik E2262 Series: 8
Buttons Reset button
Rotary Switch 0to9
Isolation 3kVDC or2kVrms

Digital Inputs

Connector Screw-fastened Euroblock terminal
Sensor Type ioLogik E2210 Series: Dry Contact and Wet Contact (NPN)ioLogik E2212/E2214/E2242 Series: Dry Contact and Wet Contact (NPN or PNP)
I/O Mode DI or event counter
Dry Contact On: short to GNDOff: open
Wet Contact (DI to GND) On: 0 to 3 VDC Off: 10 to 30 VDC
Counter Frequency 900 Hz
Digital Filtering Time Interval Software configurable
Points per COM ioLogik E2210 Series: 12 channels ioLogik E2212/E2242 Series: 6 channels ioLogik E2214 Series: 3 channels

Power Parameters

Power Connector Screw-fastened Euroblock terminal
No. of Power Inputs 1
Input Voltage 12to36 VDC
Power Consumption ioLogik E2210 Series: 202 mA @ 24 VDC ioLogik E2212 Series: 136 mA@ 24 VDC ioLogik E2214Series: 170 mA@ 24 VDC ioLogik E2240 Series: 198 mA@ 24 VDC ioLogik E2242 Series: 178 mA@ 24 VDC ioLogik E2260 Series: 95 mA @ 24 VDC ioLogik E2262 Series: 160 mA @ 24 VDC

Physical Characteristics

Dimensions 115x79x 45.6 mm (4.53 x3.11 x1.80 in)
Weight 250 g (0.55 lb)
Installation DIN-rail mounting, Wall mounting
Wiring I/O cable, 16to 26AWG Power cable, 16to26 AWG
Housing Plastic

Environmental Limits

Operating Temperature Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude 2000 m

MOXA ioLogik E2212 Available Models

Model Name Input/Output Interface Digital Input Sensor Type Analog Input Range Operating Temp.
ioLogikE2210 12xDI,8xDO Wet Contact (NPN), Dry Contact - -10 to 60°C
ioLogikE2210-T 12xDI,8xDO Wet Contact (NPN), Dry Contact - -40 to 75°C
ioLogik E2212 8xDI,4xDIO,8xDO Wet Contact (NPN or PNP), Dry Contact - -10 to 60°C
ioLogikE2212-T 8 x DI, 4 x DIO, 8 x DO Wet Contact (NPN or PNP), Dry Contact - -40 to 75°C
ioLogikE2214 6x DI, 6x Relay Wet Contact (NPN or PNP), Dry Contact - -10 to 60°C
ioLogikE2214-T 6x DI, 6x Relay Wet Contact (NPN or PNP), Dry Contact - -40 to 75°C
ioLogik E2240 8xAI, 2xAO - ±150 mV, ±500 mV, ±5 V, ±10 V, 0-20 mA, 4-20 mA -10 to 60°C
ioLogik E2240-T 8xAI,2xAO - ±150 mV, ±500 mV, ±5 V, ±10 V, 0-20 mA, 4-20 mA -40 to 75°C
ioLogik E2242 12xDIO,4xAI Wet Contact (NPN or PNP), Dry Contact ±150 mV, 0-150 mV, ±500 mV, 0-500 mV, ±5 V, 0-5 V, ±10 V, 0-10 V, 0-20 mA, 4-20 mA -10 to 60°C
ioLogik E2242-T 12xDIO,4xAI Wet Contact (NPN or PNP), Dry Contact ±150 mV, 0-150 mV, ±500 mV, 0-500 mV, ±5 V, 0-5 V, ±10 V, 0-10 V, 0-20 mA, 4-20 mA -40 to 75°C
ioLogik E2260 4 x DO, 6 x RTD - - -10 to 60°C
ioLogik E2260-T 4 x DO, 6 x RTD - - -40 to 75°C
ioLogik E2262 4xDO,8xTC - - -10 to 60°C
ioLogik E2262-T 4xDO,8xTC - - -40 to 75°C

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • MOXA MGate MB3480 Modbus TCP Gateway

      MOXA MGate MB3480 Modbus TCP Gateway

      Features and Benefits FeaSupports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Converts between Modbus TCP and Modbus RTU/ASCII protocols 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports 16 simultaneous TCP masters with up to 32 simultaneous requests per master Easy hardware setup and configurationtures and Benefits ...

    • MOXA IMC-21A-M-ST Industrial Media Converter

      MOXA IMC-21A-M-ST Industrial Media Converter

      Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFPT) -40 to 75°C operating temperature range (-T models) DIP switches to select FDX/HDX/10/100/Auto/Force Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 1 100BaseFX Ports (multi-mode SC conne...

    • MOXA ICF-1150I-S-SC Serial-to-Fiber Converter

      MOXA ICF-1150I-S-SC Serial-to-Fiber Converter

      Features and Benefits 3-way communication: RS-232, RS-422/485, and fiber Rotary switch to change the pull high/low resistor value Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode -40 to 85°C wide-temperature range models available C1D2, ATEX, and IECEx certified for harsh industrial environments Specifications ...

    • MOXA NPort 5230A Industrial General Serial Device Server

      MOXA NPort 5230A Industrial General Serial Devi...

      Features and Benefits Fast 3-step web-based configuration  Surge protection for serial, Ethernet, and power  COM port grouping and UDP multicast applications  Screw-type power connectors for secure installation  Dual DC power inputs with power jack and terminal block  Versatile TCP and UDP operation modes   Specifications Ethernet Interface 10/100Bas...

    • MOXA UPort 1410 RS-232 Serial Hub Converter

      MOXA UPort 1410 RS-232 Serial Hub Converter

      Features and Benefits Hi-Speed USB 2.0 for up to 480 Mbps USB data transmission rates 921.6 kbps maximum baudrate for fast data transmission Real COM and TTY drivers for Windows, Linux, and macOS Mini-DB9-female-to-terminal-block adapter for easy wiring LEDs for indicating USB and TxD/RxD activity 2 kV isolation protection (for “V' models) Specifications ...

    • MOXA EDS-405A-MM-SC Layer 2 Managed Industrial Ethernet Switch

      MOXA EDS-405A-MM-SC Layer 2 Managed Industrial ...

      Features and Benefits Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 PROFINET or EtherNet/IP enabled by default (PN or EIP models) Supports MXstudio for easy, visualized industrial network mana...