MOXA ioLogik E1240 Universal Controllers Ethernet Remote I/O
User-definable Modbus TCP Slave addressing
Supports RESTful API for IIoT applications
Supports EtherNet/IP Adapter
2-port Ethernet switch for daisy-chain topologies
Saves time and wiring costs with peer-to-peer communications
Active communication with MX-AOPC UA Server
Supports SNMP v1/v2c
Easy mass deployment and configuration with ioSearch utility
Friendly configuration via web browser
Simplifies I/O management with MXIO library for Windows or Linux
Class I Division 2, ATEX Zone 2 certification
Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
Input/Output Interface
| Digital Input Channels | ioLogik E1210 Series: 16ioLogik E1212/E1213 Series: 8ioLogik E1214 Series: 6
ioLogik E1242 Series: 4 |
||
| Digital Output Channels | ioLogik E1211 Series: 16ioLogik E1213 Series: 4 | ||
| Configurable DIO Channels (by jumper) | ioLogik E1212 Series: 8ioLogik E1213/E1242 Series: 4 | ||
| Relay Channels | ioLogik E1214 Series: 6 | ||
| Analog Input Channels | ioLogik E1240 Series: 8ioLogik E1242 Series: 4 | ||
| Analog Output Channels | ioLogik E1241 Series: 4 | ||
| RTD Channels | ioLogik E1260 Series: 6 | ||
| Thermocouple Channels | ioLogik E1262 Series: 8 | ||
| Isolation | 3kVDC or2kVrms | ||
| Buttons | Reset button | ||
Digital Inputs
| Connector | Screw-fastened Euroblock terminal |
| Sensor Type | Dry contactWet contact (NPN or PNP) |
| I/O Mode | DI or event counter |
| Dry Contact | On: short to GNDOff: open |
| Wet Contact (DI to COM) | On:10to 30 VDC Off:0to3VDC |
| Counter Frequency | 250 Hz |
| Digital Filtering Time Interval | Software configurable |
| Points per COM | ioLogik E1210/E1212 Series: 8 channels ioLogik E1213 Series: 12 channels ioLogik E1214 Series: 6 channels ioLogik E1242 Series: 4 channels |
Digital Outputs
| Connector | Screw-fastened Euroblock terminal |
| I/O Type | ioLogik E1211/E1212/E1242 Series: SinkioLogik E1213 Series: Source |
| I/O Mode | DO or pulse output |
| Current Rating | ioLogik E1211/E1212/E1242 Series: 200 mA per channel ioLogik E1213 Series: 500 mA per channel |
| Pulse Output Frequency | 500 Hz (max.) |
| Over-Current Protection | ioLogik E1211/E1212/E1242 Series: 2.6 A per channel @ 25°C ioLogik E1213 Series: 1.5A per channel @ 25°C |
| Over-Temperature Shutdown | 175°C (typical), 150°C (min.) |
| Over-Voltage Protection | 35 VDC |
Relays
| Connector | Screw-fastened Euroblock terminal |
| Type | Form A (N.O.) power relay |
| I/O Mode | Relay or pulse output |
| Pulse Output Frequency | 0.3 Hz at rated load (max.) |
| Contact Current Rating | Resistive load: 5A@30 VDC, 250 VAC,110 VAC |
| Contact Resistance | 100 milli-ohms (max.) |
| Mechanical Endurance | 5,000,000 operations |
| Electrical Endurance | 100,000 operations @5A resistive load |
| Breakdown Voltage | 500 VAC |
| Initial Insulation Resistance | 1,000 mega-ohms (min.) @ 500 VDC |
| Note | Ambient humidity must be non-condensing and remain between 5 and 95%. The relays may malfunction when operating in high condensation environments below 0°C. |
Physical Characteristics
| Housing | Plastic |
| Dimensions | 27.8 x124x84 mm (1.09 x 4.88 x 3.31 in) |
| Weight | 200 g (0.44 lb) |
| Installation | DIN-rail mounting, Wall mounting |
| Wiring | I/O cable, 16to 26AWG Power cable, 12to24 AWG |
Environmental Limits
| Operating Temperature | Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Altitude | 4000 m4 |
MOXA ioLogik E1200 Series Available Models
| Model Name | Input/Output Interface | Digital Output Type | OperatingTemp. |
| ioLogikE1210 | 16xDI | - | -10 to 60°C |
| ioLogikE1210-T | 16xDI | - | -40 to 75°C |
| ioLogikE1211 | 16xDO | Sink | -10 to 60°C |
| ioLogikE1211-T | 16xDO | Sink | -40 to 75°C |
| ioLogikE1212 | 8xDI,8xDIO | Sink | -10 to 60°C |
| ioLogikE1212-T | 8 x DI, 8 x DIO | Sink | -40 to 75°C |
| ioLogikE1213 | 8 x DI, 4 x DO, 4 x DIO | Source | -10 to 60°C |
| ioLogikE1213-T | 8 x DI, 4 x DO, 4 x DIO | Source | -40 to 75°C |
| ioLogikE1214 | 6x DI, 6x Relay | - | -10 to 60°C |
| ioLogikE1214-T | 6x DI, 6x Relay | - | -40 to 75°C |
| ioLogikE1240 | 8xAI | - | -10 to 60°C |
| ioLogikE1240-T | 8xAI | - | -40 to 75°C |
| ioLogikE1241 | 4xAO | - | -10 to 60°C |
| ioLogikE1241-T | 4xAO | - | -40 to 75°C |
| ioLogikE1242 | 4DI,4xDIO,4xAI | Sink | -10 to 60°C |
| ioLogikE1242-T | 4DI,4xDIO,4xAI | Sink | -40 to 75°C |
| ioLogikE1260 | 6xRTD | - | -10 to 60°C |
Related products
-
MOXA EDS-G512E-4GSFP Layer 2 Managed Switch
Introduction The EDS-G512E Series is equipped with 12 Gigabit Ethernet ports and up to 4 fiber-optic ports, making it ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. It also comes with 8 10/100/1000BaseT(X), 802.3af (PoE), and 802.3at (PoE+)-compliant Ethernet port options to connect high-bandwidth PoE devices. Gigabit transmission increases bandwidth for higher pe...
-
MOXA EDS-G205-1GTXSFP 5-port Full Gigabit Unman...
Features and Benefits Full Gigabit Ethernet portsIEEE 802.3af/at, PoE+ standards Up to 36 W output per PoE port 12/24/48 VDC redundant power inputs Supports 9.6 KB jumbo frames Intelligent power consumption detection and classification Smart PoE overcurrent and short-circuit protection -40 to 75°C operating temperature range (-T models) Specifications ...
-
MOXA EDS-G508E Managed Ethernet Switch
Introduction The EDS-G508E switches are equipped with 8 Gigabit Ethernet ports, making them ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. Gigabit transmission increases bandwidth for higher performance and transfers large amounts of triple-play services across a network quickly. Redundant Ethernet technologies such as Turbo Ring, Turbo Chain, RSTP/STP, and MSTP increase the reliability of yo...
-
MOXA NPort IA5450AI-T industrial automation dev...
Introduction The NPort IA5000A device servers are designed for connecting industrial automation serial devices, such as PLCs, sensors, meters, motors, drives, barcode readers, and operator displays. The device servers are solidly built, come in a metal housing and with screw connectors, and provide full surge protection. The NPort IA5000A device servers are extremely user-friendly, making simple and reliable serial-to-Ethernet solutions possi...
-
MOXA EDS-208A-MM-SC 8-port Compact Unmanaged In...
Features and Benefits 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/single-mode, SC or ST connector) Redundant dual 12/24/48 VDC power inputs IP30 aluminum housing Rugged hardware design well suited for hazardous locations (Class 1 Div. 2/ATEX Zone 2), transportation (NEMA TS2/EN 50121-4/e-Mark), and maritime environments (DNV/GL/LR/ABS/NK) -40 to 75°C operating temperature range (-T models) ...
-
MOXA ICF-1180I-M-ST Industrial PROFIBUS-to-fibe...
Features and Benefits Fiber-cable test function validates fiber communication Auto baudrate detection and data speed of up to 12 Mbps PROFIBUS fail-safe prevents corrupted datagrams in functioning segments Fiber inverse feature Warnings and alerts by relay output 2 kV galvanic isolation protection Dual power inputs for redundancy (Reverse power protection) Extends PROFIBUS transmission distance up to 45 km ...