MOXA IMC-21A-M-SC Industrial Media Converter
Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFPT)
-40 to 75°C operating temperature range (-T models)
DIP switches to select FDX/HDX/10/100/Auto/Force
Ethernet Interface
| 10/100BaseT(X) Ports (RJ45 connector) | 1 |
| 100BaseFX Ports (multi-mode SC connector) | IMC-21A-M-SC Series: 1 |
| 100BaseFX Ports (multi-mode ST connector) | IMC-21A-M-ST Series: 1 |
| 100BaseFX Ports (single-mode SC connector) | IMC-21A-S-SC Series: 1 |
| Magnetic Isolation Protection | 1.5 kV (built-in) |
Power Parameters
| Input Current | 12to48 VDC, 265mA (Max.) |
| Input Voltage | 12to48 VDC |
| Overload Current Protection | Supported |
| Power Connector | Terminal block |
| Reverse Polarity Protection | Supported |
Physical Characteristics
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 30x125x79 mm(1.19x4.92x3.11 in) |
| Weight | 170g(0.37 lb) |
| Installation | DIN-rail mounting |
Environmental Limits
| Operating Temperature | Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 75°C (-40 to167°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
MOXA IMC-21A-M-SC Available Models
| Model Name | Operating Temp. | Fiber Module Type |
| IMC-21A-M-SC | -10 to 60°C | Multi-mode SC |
| IMC-21A-M-ST | -10 to 60°C | Multi-mode ST |
| IMC-21A-S-SC | -10 to 60°C | Single-mode SC |
| IMC-21A-M-SC-T | -40 to 75°C | Multi-mode SC |
| IMC-21A-M-ST-T | -40 to 75°C | Multi-mode ST |
| IMC-21A-S-SC-T | -40 to 75°C | Single-mode SC |
Related products
-
MOXA EDS-2018-ML-2GTXSFP Gigabit Unmanaged Ethe...
Features and Benefits 2 Gigabit uplinks with flexible interface design for high-bandwidth data aggregationQoS supported to process critical data in heavy traffic Relay output warning for power failure and port break alarm IP30-rated metal housing Redundant dual 12/24/48 VDC power inputs -40 to 75°C operating temperature range (-T models) Specifications ...
-
MOXA A52-DB9F w/o Adapter converter with DB9F c...
Introduction The A52 and A53 are general RS-232 to RS-422/485 converters designed for users who need to extend RS-232 transmission distance and increase networking capability. Features and Benefits Automatic Data Direction Control (ADDC) RS-485 data control Automatic baudrate detection RS-422 hardware flow control: CTS, RTS signals LED indicators for power and signal...
-
MOXA ICF-1150I-M-ST Serial-to-Fiber Converter
Features and Benefits 3-way communication: RS-232, RS-422/485, and fiber Rotary switch to change the pull high/low resistor value Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode -40 to 85°C wide-temperature range models available C1D2, ATEX, and IECEx certified for harsh industrial environments Specifications ...
-
MOXA DA-820C Series Rackmount Computer
Introduction The DA-820C Series is a high-performance 3U rackmount industrial computer built around a 7th Gen Intel® Core™ i3/i5/i7 or Intel® Xeon® processor and comes with 3 display ports (HDMI x 2, VGA x 1), 6 USB ports, 4 gigabit LAN ports, two 3-in-1 RS-232/422/485 serial ports, 6 DI ports, and 2 DO ports. The DA-820C is also equipped with 4 hot swappable 2.5” HDD/SSD slots that support Intel® RST RAID 0/1/5/10 functionality and PTP...
-
MOXA ICS-G7526A-2XG-HV-HV-T Gigabit Managed Eth...
Introduction Process automation and transportation automation applications combine data, voice, and video, and consequently require high performance and high reliability. The ICS-G7526A Series full Gigabit backbone switches are equipped with 24 Gigabit Ethernet ports plus up to 2 10G Ethernet ports, making them ideal for large-scale industrial networks. The ICS-G7526A’s full Gigabit capability increases bandwidth ...
-
MOXA EDS-305-S-SC 5-port unmanaged Ethernet switch
Introduction The EDS-305 Ethernet switches provide an economical solution for your industrial Ethernet connections. These 5-port switches come with a built-in relay warning function that alerts network engineers when power failures or port breaks occur. In addition, the switches are designed for harsh industrial environments, such as the hazardous locations defined by the Class 1 Div. 2 and ATEX Zone 2 standards. The switches ...