MOXA ICF-1180I-S-ST Industrial PROFIBUS-to-fiber Converter
Fiber-cable test function validates fiber communication Auto baudrate detection and data speed of up to 12 Mbps
PROFIBUS fail-safe prevents corrupted datagrams in functioning segments
Fiber inverse feature
Warnings and alerts by relay output
2 kV galvanic isolation protection
Dual power inputs for redundancy (Reverse power protection)
Extends PROFIBUS transmission distance up to 45 km
Wide-temperature model available for -40 to 75°C environments
Supports Fiber Signal Intensity Diagnosis
Serial Interface
| Connector | ICF-1180I-M-ST: Multi-modeST connector ICF-1180I-M-ST-T: Multi-mode ST connectorICF-1180I-S-ST: Single-mode ST connectorICF-1180I-S-ST-T: Single-mode ST connector |
PROFIBUS Interface
| Industrial Protocols | PROFIBUS DP |
| No. of Ports | 1 |
| Connector | DB9 female |
| Baudrate | 9600 bps to12 Mbps |
| Isolation | 2kV(built-in) |
| Signals | PROFIBUS D+, PROFIBUS D-, RTS, Signal Common, 5V |
Power Parameters
| Input Current | 269 mA@12to48 VDC | |
| Input Voltage | 12to48 VDC | |
| No. of Power Inputs | 2 | |
| Overload Current Protection | Supported | |
| Power Connector | Terminal block (for DC models) | |
| Power Consumption | 269 mA@12to48 VDC | |
| Physical Characteristics | ||
| Housing | Metal | |
| IP Rating | IP30 | |
| Dimensions | 30.3x115x70 mm (1.19x4.53x 2.76 in) | |
| Weight | 180g(0.39 lb) | |
| Installation | DIN-rail mounting (with optional kit) Wall mounting | |
Environmental Limits
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
MOXA ICF-1180I Series Available Models
| Model Name | Operating Temp. | Fiber Module Type |
| ICF-1180I-M-ST | 0 to 60°C | Multi-mode ST |
| ICF-1180I-S-ST | 0 to 60°C | Single-mode ST |
| ICF-1180I-M-ST-T | -40 to 75°C | Multi-mode ST |
| ICF-1180I-S-ST-T | -40 to 75°C | Single-mode ST |
Related products
-
MOXA EDS-2010-ML-2GTXSFP 8+2G-port Gigabit Unma...
Introduction The EDS-2010-ML series of industrial Ethernet switches have eight 10/100M copper ports and two 10/100/1000BaseT(X) or 100/1000BaseSFP combo ports, which are ideal for applications that require high-bandwidth data convergence. Moreover, to provide greater versatility for use with applications from different industries, the EDS-2010-ML Series also allows users to enable or disable the Quality of Service...
-
MOXA EDS-518E-4GTXSFP-T Gigabit Managed Industr...
Features and Benefits 4 Gigabit plus 14 fast Ethernet ports for copper and fiberTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security Security features based on IEC 62443 EtherNet/IP, PROFINET, and Modbus TCP protocols support...
-
MOXA MGate 5103 1-port Modbus RTU/ASCII/TCP/Eth...
Features and Benefits Converts Modbus, or EtherNet/IP to PROFINET Supports PROFINET IO device Supports Modbus RTU/ASCII/TCP master/client and slave/server Supports EtherNet/IP Adapter Effortless configuration via web-based wizard Built-in Ethernet cascading for easy wiring Embedded traffic monitoring/diagnostic information for easy troubleshooting microSD card for configuration backup/duplication and event logs St...
-
MOXA EDS-308-SS-SC Unmanaged Industrial Etherne...
Features and Benefits Relay output warning for power failure and port break alarm Broadcast storm protection -40 to 75°C operating temperature range (-T models) Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) EDS-308/308-T: 8EDS-308-M-SC/308-M-SC-T/308-S-SC/308-S-SC-T/308-S-SC-80:7EDS-308-MM-SC/308...
-
MOXA AWK-1137C Industrial Wireless Mobile Appli...
Introduction The AWK-1137C is an ideal client solution for industrial wireless mobile applications. It enables WLAN connections for both Ethernet and serial devices, and is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The AWK-1137C can operate on either the 2.4 or 5 GHz bands, and is backwards-compatible with existing 802.11a/b/g ...
-
MOXA ioLogik E1241 Universal Controllers Ethern...
Features and Benefits User-definable Modbus TCP Slave addressing Supports RESTful API for IIoT applications Supports EtherNet/IP Adapter 2-port Ethernet switch for daisy-chain topologies Saves time and wiring costs with peer-to-peer communications Active communication with MX-AOPC UA Server Supports SNMP v1/v2c Easy mass deployment and configuration with ioSearch utility Friendly configuration via web browser Simp...