MOXA EDS-510A-3SFP-T Layer 2 Managed Industrial Ethernet Switch
2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet port for uplink solutionTurbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01
Input/Output Interface
| Alarm Contact Channels | 2, Relay output with current carrying capacity of 1 A @ 24 VDC |
| Digital Input Channels | 2 |
| Digital Inputs | +13 to +30 V for state 1 -30 to +3 V for state 0 Max. input current: 8 mA |
Ethernet Interface
| 10/100BaseT(X) Ports (RJ45 connector) | 7Auto negotiation speed Full/Half duplex modeAuto MDI/MDI-X connection |
| 10/100/1000BaseT(X) Ports (RJ45 connector) | EDS-510A-1GT2SFP Series: 1EDS-510A-3GT Series: 3Supported functions:Auto negotiation speed Full/Half duplex mode
Auto MDI/MDI-Xconnection |
| 1000BaseSFP Slots | EDS-510A-1GT2SFP Series: 2EDS-510A-3SFP Series: 3 |
| Standards |
IEEE802.3for10BaseTIEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for1000BaseT(X) IEEE 802.3z for1000BaseSX/LX/LHX/ZX IEEE 802.1X for authentication IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1wfor Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.3x for flow control IEEE 802.3ad for Port Trunkwith LACP |
Switch Properties
| IGMP Groups | 256 |
| MAC Table Size | 8K |
| Max. No. ofVLANs | 64 |
| Packet Buffer Size | 1 Mbits |
| Priority Queues | 4 |
| VLAN ID Range | VID1 to4094 |
Power Parameters
| Connection | 2 removable 6-contact terminal block(s) |
| Input Current | EDS-510A-1GT2SFP Series: 0.38 A@24 VDC EDS-510A-3GT Series: 0.55 A@24 VDC EDS-510A-3SFP Series: 0.39 A@24 VDC |
| Input Voltage | 24VDC, Redundant dual inputs |
| Operating Voltage | 12to45 VDC |
| Overload Current Protection | Supported |
| Reverse Polarity Protection | Supported |
Physical Characteristics
| Housing | Metal |
| IP Rating | IP30 |
| Dimensions | 80.2 x135x105 mm (3.16 x 5.31 x 4.13 in) |
| Weight | 1170g(2.58lb) |
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
Environmental Limits
| Operating Temperature | Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature (package included) | -40 to 85°C (-40 to185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
MOXA EDS-510A-3SFP-T Available Models
| Model 1 | MOXA EDS-510A-1GT2SFP |
| Model 2 | MOXA EDS-510A-3GT |
| Model 3 | MOXA EDS-510A-3SFP |
| Model 4 | MOXA EDS-510A-1GT2SFP-T |
| Model 5 | MOXA EDS-510A-3GT-T |
| Model 6 | MOXA EDS-510A-3SFP-T |
Related products
-
MOXA EDS-305-M-ST 5-port unmanaged Ethernet switch
Introduction The EDS-305 Ethernet switches provide an economical solution for your industrial Ethernet connections. These 5-port switches come with a built-in relay warning function that alerts network engineers when power failures or port breaks occur. In addition, the switches are designed for harsh industrial environments, such as the hazardous locations defined by the Class 1 Div. 2 and ATEX Zone 2 standards. The switches ...
-
MOXA NPort 5650I-8-DTL RS-232/422/485 serial de...
Introduction MOXA NPort 5600-8-DTL device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with basic configurations. You can both centralize management of your serial devices and distribute management hosts over the network. The NPort® 5600-8-DTL device servers have a smaller form factor than our 19-inch models, making them a great choice fo...
-
MOXA SFP-1GSXLC 1-port Gigabit Ethernet SFP Module
Features and Benefits Digital Diagnostic Monitor Function -40 to 85°C operating temperature range (T models) IEEE 802.3z compliant Differential LVPECL inputs and outputs TTL signal detect indicator Hot pluggable LC duplex connector Class 1 laser product, complies with EN 60825-1 Power Parameters Power Consumption Max. 1 W ...
-
MOXA IMC-101-M-SC Ethernet-to-Fiber Media Conve...
Features and Benefits 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X Link Fault Pass-Through (LFPT) Power failure, port break alarm by relay output Redundant power inputs -40 to 75°C operating temperature range (-T models) Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx) Specifications Ethernet Interface ...
-
MOXA MGate 5101-PBM-MN Modbus TCP Gateway
Introduction The MGate 5101-PBM-MN gateway provides a communication portal between PROFIBUS devices (e.g. PROFIBUS drives or instruments) and Modbus TCP hosts. All models are protected with a rugged metallic casing, DIN-rail mountable, and offer optional built-in optical isolation. The PROFIBUS and Ethernet status LED indicators are provided for easy maintenance. The rugged design is suitable for industrial applications such as oil/gas, power...
-
MOXA IKS-6728A-4GTXSFP-HV-HV-T 24+4G-port Gigab...
Features and Benefits 8 built-in PoE+ ports compliant with IEEE 802.3af/at (IKS-6728A-8PoE) Up to 36 W output per PoE+ port (IKS-6728A-8PoE) Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches) , and STP/RSTP/MSTP for network redundancy 1 kV LAN surge protection for extreme outdoor environments PoE diagnostics for powered-device mode analysis 4 Gigabit combo ports for high-bandwidth communicatio...